416 people

[luvmyex]

I have 22" tires on the rear so i went to a 14th counter sprocket.What i am wanting to know is when i finnaly get my piston in, will it be enought differance to go back to the 15th sprocket?Also will have the hotcam stage II.

[Silverfox@C&DRacing]

I Like my stock gearing but I run 20" tires I know of a few people that have the same thing that you are doing and they swear by the 14 tooth front sprocket...

[Dune Surfer]

I run a 14t but I mostly ride sand dunes.

[la400ex]

Im gonna try out a 14 tooth. My 416 gave me a lot of mid and top but not so much on the bottom. Im gonna try it out, if i dont like it. I will just take it off. later, Ant

[YZROOSTINYA]

i run a 15 with 23/22 set up, only way to go for trails/hill climbs and fast trails

[K_Fulk]

I run a 16t front with 20in razrs.
Depending on what all your having done you may be able to pull. If you get a cam and portwork you should be able too.

For trail's and hill climbs yes a 15 tooth will work witha 416 kit....but a 14 tooth will work 1000 times better hands down... :macho

[YZROOSTINYA]

where i ride it made me shift too much and i was always stuck between gears like too high for 3rd but not enough for fourth and so on. now i just hold 3rd and its all good. and so on

you'll have to try it to see how you like it, its only 20 bucks

it def has more power with the 14 but i like the gearing with the 15

[luvmyex]

well looks like i will just have to try it.Seems like everyone is a lil different.