burgard atv stand.

[Honda4life05]

does anyone have any experiance with these? it looks like a cool idea but idk if i'm willing to spend $100 for it. looks a little tipsy. i think they should have something locking it in, so the quad doesn't go back on the grab bar without you wanting it to. <object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/Bj72mNi3q1Q&color1=0xb1b1b1&color2=0xcfcfcf&hl=en_US&feature=player_embedded&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowScriptAccess" value="always"></param><embed src="http://www.youtube.com/v/Bj72mNi3q1Q&color1=0xb1b1b1&color2=0xcfcfcf&hl=en_US&feature=player_embedded&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" allowScriptAccess="always" width="425" height="344"></embed></object>

[ROLLIEsMOMMY]

I have an AC one, same thing, they work great.

[300ex mxracer]

Made my own, works just as good

[troybilt]

Originally posted by 300ex mxracer
Made my own, works just as good

X2, simple to make... works great.

[ejmoan1]

We have a motorsport products stand and its soild as a rock Its has ratchet straps to tighten the quad down, and sits stable with out the straps.

[racer 557]

looks like about the same thing i had when i raced go kart and could some one get me measurements for the atv stand im going to try to make one thanks

[troybilt]

I can get you the measurements this afternoon. I have them on my work computer. I measured the AC racing one and built my own, actually, I had a machine shop make them for me. But I made mine out of steel tubing and then powdercoated them. I think it works a little better being slightly heavier. Doesn't want to slide around as much. I also used #50 chain, instead of nylon straps. It doesn't stretch as much and you could park a D8 dozer on it... LOL... super easy to build anyone could make them.

[Baileygunns]

Could you send me those plans please?

Baileygunns@hotmail.com

Very much appreciated!!

[troybilt]

I can't find a single picture of mine on my work computer. I'll try and find my notes at home with my tape measure dimensions.

[troybilt]

here, make at your own risk...

overall height unfolded: 24"
width of widest leg: 15"
Width of narrow leg: 11.75", depends on what tubing or angle iron you use... BTW
Unfolded length, spread bw to top bars: 22"
Length of short leg: 31"
Length of long leg: 32.25"
Length to pivot on long leg: 13.85"
Length to pivot on short leg: 14.53"

[motoboy66]

here is mine. I have a folding one for the races, but this one is for shop.