PDA

View Full Version : something broke...



joeyds450x
01-22-2010, 06:54 AM
so i was going 5th gear wide open and all the sudden i hit the rev limiter.. thought it poped out of gear but it didnt so i shut the quad off.. i figured oh great so there went my clutch finally.. well i called the dealer they said the same thing that it was the clutch.. i took the clutch cover off and the basket is still there and so are the clutch plates.. i thought it was weird if the clutch went out and there was still pressure there when i pulled the lever in.. so im unsure of the problem now, im thinking it was the gears or something but it still shifts into all 5 gears just fine.. but i can push it around like its in nuetral..

any ideas to wut it could be? :confused:

LTMFB
01-22-2010, 07:02 AM
Just a quick question.....you said there is pressure but is it releasing fully?

joeyds450x
01-22-2010, 07:11 AM
Originally posted by LTMFB
Just a quick question.....you said there is pressure but is it releasing fully?
yes it is.. the clutch feels like its working just fine..

blaster99
01-24-2010, 08:03 AM
Did the gear on the back of the basket in-rivet itself?

joeyds450x
01-24-2010, 09:33 AM
Originally posted by blaster99
Did the gear on the back of the basket in-rivet itself?
im not sure i didnt take it that far apart.. the motor is at the dealer now.. should be covered under warrenty they said..

BSTURDIVANT
01-24-2010, 09:06 PM
Redo your adjustment at the case! It probably lost play and is holding then clutch plate in! Set it at 1/2 turn out and lock it down! Clutches wore down and took up all the clearance!