Kickstart Problems!!!???

[450Hondace]

Ok so i have an 05 450r and i took the right crankcase cover off to put a new gasket on and my kickstart worked fine before and now it wont spring back up after i have kicked it down i even put new springs and thrust washers and a new collar on the spindle.
95% sure i put everything back correctly (I followed the manual).
But any advice on what could be wrong would help me out a ton.

[Scro]

I would double check the spring around the kicker output shaft. That is the only thing brings the kicker back to the original position.

[450Hondace]

Alright will do.
but there is nothing else that would cause it to stick down?

[Scro]

I've heard of it getting stuck underneath the brake pedal, but that would be pretty obvious. Make sure the spring is in the right hole in the case. If I remember correctly, there's a couple places the spring could go on the 04/05 models.

[450Hondace]

Alright ill check that.
thanks

[BSTURDIVANT]

Your engaging gear (one that pulls out with the stop on return) has a dot to align with the shaft splines. If not in the right spot it won't wind the spring enough!

[KEVIN132]

theres 2 dots that must align on kicker gears and the part of the gear must go in between the stoppers by edge of case!!:)