what have YOU customly done to your quad?

[speedy400]

well I removed the stock headlights and made this for her

i woulda just bought one.....u did a good job tho

[CBW]

did all my own PC'ing, polishing and assembly stuff on all my quads. Here is my 400 again;)

[speedy400]

nice!

Here's mine after I let a buddy ride it...:(

[MichaelS693]

Originally posted by speedy400
well I removed the stock headlights and made this for her

not my cup of tea..............but original, good job:)

[DEAL]

Only custom mod i did was file "x"s into my stock brake lever, made a custom end cap for my stock exhaust and shaved my headpipe, Removed the headshield and grinded the brackets off the stock header so it looks like an aftermarket header now.

[DGR Designs]

made a cell phone holder that bolts to the crossbar of my bars, airscoops (which you can purchase from me for $60cdn + shipping) neons under it, custom frame armour on the front, polishing, engraving marks which only a se;ect few people know of in case its stolen :devil long live the dremel engraving bit. uuuh i think thats it!

[killed300ex]

i have taken off the reverse limiter on the 300 i know there are some other things but i cant think of them right now
killed

[muff]

painted my headlight plastic :D , and I have these flame/tribal chrome graphics

very soon to come: powdercoated and polished parts and an installed blue dg headlight guard

[Sparks425Ex]

I Have polished everything that can be polished cept the engine. Custom Cut my Bills Thunder Series, Custom cut my Brake lever and clutch lever, cut off the tail light tabs and tool box tabs. Grinded out the welds on my header, Removed my choke on my carb. Dilled my air box(Not on anymore)

I think that is it.

[flyin#5]

im in the process of making wheel spacer and i customed my air box usting some filter paper stuff so its like having the top off but still protection against dirt getting in.

[250x#93]

I made this brake rezzy cover. next i'm going to make a throttle cap and a parking brake block off plate. :devil

[nakomis0]

I had neons, and I had strobes in my headlights.. but those are all removed now.

I do have this pretty trick 440ex flame badge..

[BlazingYamahaYz]

Originally posted by Rico
Here's mine after I let a buddy ride it...:(

are u serious:confused: man that person did some serious damage, what exactly happened:huh

[hondaracer31]

Here is hondahackers 300ex. He custom built his front suspension...

[hondaracer31]

Here's another shot of his 300. He rebuilt everything in front of the motor...

[DGR Designs]

did he have like an accident or sumthin and not wanna buy a new frame?

[L.Vegas400]

i made this thingy, and have my heat shield pced thanks to pappy

[TheX1992]

i got a little 'ram air' thing i tried out. works pretty good. ill get some pics scanned one of these days

[sportraxrider10]

i made this...

[Bean]

i believe some punk tourched that Sportsman 500 after he/she figured they couldnt steal it

[ShiftFMX]

Really the only things ive done is sand down my heat sheild so that its silver instead of black and i trimmed my breakpad cover so the valve stem goes over it instead of hitting it...

[ShiftFMX]

heres my break pad covers...

Does spending $7,500 extra on quad make it custom???:eek:

[roostin_dale]

Only custom things i have done is polish the footpegs, bars, and bumper.

[hondaracer31]

Originally posted by DGR Designs
did he have like an accident or sumthin and not wanna buy a new frame?

No accident...He just thinks he can do it better than anything he can buy!

[Quadfather]

Too much to list, but here it is.

[yellowrider]

its not my quad but a guy that bought a 250ex
that rode with us last week when we had all that snow had a custom 250ex ...

it had a white brothers pipe kn airfilter with no outwear and NO airboke it was just hanging ffrom the airfilter holder i never seen nothing like it so i figured i share that with you all...

oh and he got a custom bent axle when he screwed up and came down the hill to fast the wrong way casue he couldnt make it up

i wish i could get you all a picture of what his 250ex looks like with that air box

[speedy400]

oh yeah i made spacers for my fmf slip on megamax II..sorry it really blurry but its the only pic i have, they just space about 1/2 an inch so i get more air flow

[BigBore81]

me and ex80 made my exhaust for my crf450 i also made 1/4"aluminum case saver for it. Aluminum waterpump cover, kick start extension, Aluminum shock resevoir clamps, Aluminum head stay for top of crf motor, Aluminum airbox for a lonestar no link chassis and i made aluminum seat latch with pins

[Krazy Kid]

what did u use to polish those cases... how long did it take? tx :D

[Sick0]

I must be nice to work at a machine shop.. You should see my machine shop in bed room. All i need is my trusty Dewalt drill and grinder.

[BigBore81]

ha thats funny lol been riding at all sicko? whats ur plans for next year? same bike get ur tranny all fixed?

[Sick0]

Still putting the 400 to gather. I just got done making gusset for the frame. And the frame getting sent out this week. I just got do putting the motor togather. Hopefully I will get the bike running by next weekend. So I can finally really get use the shocks and axle.

[Chef]

Originally posted by Rico
Does spending $7,500 extra on quad make it custom???:eek:

Yea, how about $14,000 extra too?:eek: :o

[Sick0]

Oh by the way I mademy own sterring stem thats snap in 2 at southwick. Plus made my own hangers for the DG nurf bars so they wouldn't bend down. very trick set up.

[popo]

You guys are crazy adding all that chrome and stuff. It's gonna just get dirty. Me, I am just gonna just leave mine stock.....:devil

[Braff1]

Here is a cover I made for my oil lines. I also have made one to cover the flywheel cover, skid plate, bracket to mount kill swithch in between handle bar clamps, and a-arm covers.

customs/mods ...hm,.. which one ?..lol:devil

[86atc250r]

Custom stuff, eh... Too much to list, but here's the latest, my damper setup.

http://home.earthlink.net/~gellett/images/tmp/damper_left.jpg

[400exdad]

Don't tell anyone, but I like to fabricate stuff for my quads more than riding them.

400EX Lineguard

[400exdad]

LT80 Exhaust - Cut down 250R silencer on a CT pipe. Handmade turndown and sparkarrestor.

Just noticed in the pic... cut down 400EX grab bar... one my friend gave me after he rolled back into a tree with it and bent the center of it.

[user101]

Hey Gabe r u serious:huh

[Rip_Tear]

A couple dozen zip ties... I wish I didnt have to do any custom stuff... :D

[86atc250r]

Yep, more adjustability, more high speed damping, and longer damper life - that setup is working FAR better than the WER damper that I used to run & requires much less maintenance.....

[user101]

cool:cool:

[infantry317]

Here's my stuff I did.

[infantry317]

pic didn't go

[QuadJunkies]

I custom made my grahpics as most of you already know..;)

[QuadJunkies]

2

[muff]

Originally posted by infantry317
Here's my stuff I did.

wow thats pretty cool, do you have any pictures of the actual products?

[infantry317]

This is the skid before I put the gussets for extra strength

[infantry317]

Here's the battery strap, the peg extenders are being made at work, hopefully have them next week.

[luvmyex]

I didnt know you made them QJ.Thats pretty cool.

[kicken250x]

Originally posted by infantry317
Here's the battery strap, the peg extenders are being made at work, hopefully have them next week.

you know you have your tool bok on backerds right? you machined all that stuff? looks pretty sick!

[400exdad]

Quadjunkies and Infantry - very nice work!

QJ - I'm supposing you used Autocad for the design of your goodies. I just began using it and designed my trailer and trailer box with it. I haven't learned how to do the 3D stuff yet. :( I hope to finish it today and get some pics of it up next week.... Meanwhile, my friends are going riding again.. :mad:

[kicken250x]

Originally posted by 400exdad
Quadjunkies and Infantry - very nice work!

QJ - I'm supposing you used Autocad for the design of your goodies. I just began using it and designed my trailer and trailer box with it. I haven't learned how to do the 3D stuff yet. :( I hope to finish it today and get some pics of it up next week.... Meanwhile, my friends are going riding again.. :mad:

3D on CAD is pretty darn hard to get everything jut how you want it. Ive takin the class at school and that is about all we do is work on CAD. This one program I have used was crazy easy to do anything you want. I built like some little alter for a game a friend is desiging in 58 min and 19 sec on there that includes the graphing stage block stage, final round out stage and coloring. I did the same alter on CAD and it took me 2 hours and something to make it. Ill try to find out what program it is and let you know. Later...

[infantry317]

Solidworks (solidquerks) is the program I used, it's not too bad. Thanks for the compliments.

[QuadJunkies]

Originally posted by 400exdad
Quadjunkies and Infantry - very nice work!

QJ - I'm supposing you used Autocad for the design of your goodies. I just began using it and designed my trailer and trailer box with it. I haven't learned how to do the 3D stuff yet. :( I hope to finish it today and get some pics of it up next week.... Meanwhile, my friends are going riding again.. :mad: I cant take full credit, I had a graphics drawn up for me, but the designs are mine...:D ... So, was the idea for the vinyl i used...;) Thanks for the compliment:)

[crazyatvn]

Here is some of the stuff I custom made.
think anyone would like to buy any of my stuff if Itried to sell some?
1

[crazyatvn]

2

[crazyatvn]

3
they glow bright red Cool effect.