houser a arms

[tpro450r]

I found some nice used houser a arms. they say they're for a 04/05 trx 450r....will these work on my 06? I dont know if there is a difference between the model years

[jpfmotors]

I would think they would work you would have to use 04/05 knuckles though

[eastside 400]

you should be able to use them with the 06 spindles, they should have enough adjustment into them to take care of that, if not then you need the 04-05 spindles and hubs

[staakej]

lenght is the only difference. i'm not 100% sure but I think houser made like +2 and +21/2 for 04 05 modles and 06 had longer spindles they where like +2 3/8 or somthing like that. I put 04 05 a arms +2 1/2 on my 07 before I got 04 05 spindles and I was just over barly over 50 inches. but it still worked fine but the 04 05 spindles seem to handle better

[tpro450r]

In the picture they are showing the spindles still mounted to the a arms with rotors and calipers, and the tie rods included. they might be sold as the whole assembly. I'm going to email the person and ask if thats all included. thanks for the info