250r/crf450x frontline hybrid partout TONS OF PARTS!!!!!

[step869]

.........EVERYTHING MUST GO ................
............SPEAK UP................
..........ASK FOR PICKS..........



freshly powder coated orange frontline 250r frame/sub frame converted by prp to run the crf motor(did a great job)1
freshly powder coated silvervien frontline steering stem
freshly powder coated silvervien frontline no link swing arm.........1200.00 FOR ALL

front axis shocks standard travel (link new) remote ressies.......350.00 PAIR
rear axis nolink shock standard travel (like new) remote ressie..........225.00
+2 aftermarket a arms (not chrome) not sure of brand see pic may need new powder........215.00
+2 burguard tie rods with ends........30.00 PAIR
rear 9" itp beadlocks/baja rear with holeshots.....160.00 PAIR
front 10" dougles yellow labels with kenda klaws.......80.00 PAIR
250 complete seat (small tear)......40.00
blue 250r fullbore front and rear plastic......100.00
ac propeg nurfbars............50
ac rear grab bar.......25.00
2004 crf450r magura hydo clutch system........100.00
lsr +4 axle.......125.00
lsr bearing carrier.....65.00
lsr sprocket hub
lsr rear brake hub
lsr antifade lock nut.......50.00 ALL
lsr steering stem clamp......25.00
after market handlebar mount with built in teather comes with teather.......40.00
freshly powder coated orange front 400ex hub.......15.00 PAIR
freshly powder coated orange rear 250r hubs.........15.00 PAIR
galfer front wave rotors.......45.00 PAIR
galfer rear wave rotor ......40.00
galfer dual front brake hoses 400ex......30.00
stream line ss front brake lines......35.00
1 set 400ex front brake calipers........40.00 PAIR
1 set 400ex spindles.....35.00 PAIR
1 set 450r spindles.......40.00 PAIR
1 set 450r front brake calipers.............55.00 PIR
450r front master....30.00
250r front master with hinson lever and k&k cover.....35.00
rear 450r master /pedel / res......35.00
rear 250r master....25.00
billit 250r rear brake pedel....25.00
k&k rear master gaurd......10.00
rear 450r caliper & hose...25.00
250r rear steel braided brake line.....20.00
stock 250r rear caliper with nac's block off.......20.00
13tooth front sprocket & 38 tooth rear sprocket.........10.00
250r thumb throttle with nac's cover.....15.00
2 stock 250r radiators...........20.00 EACH
omf ss radiator shrouds.......20.00
250r front omf radiator louvers.....20.00
1 set moose handle bars......20.00
1 set powermaid handguards.........15.00
stock 250r red tank with petcock.......30.00
black 250r tank cover.......12.0
bvc fuel vent
billit gas cap......30.00 CAP AND VENT
stock 250r airbox with filter...25.00

2006 honda crf450x motor (elec. start) needs a crank ( top end removed havent split cases yet )
have everything but a crank and gaskets to repair
head has mild port work done with (kmyc) engraved in head........800.00 WITH ELECTRONICS
dream water pump cover......40.00
all electronics for 2006 crf450x motor
crf 450 kicker with ext...35.00
crf450x carb.....170.00 WITH OUT QUICK SHOT COVER
boysen quick shot cover....25.00
fmf factory 4 muffler (removed from a 2005 rmz450 ...needs to be cut to fit)....50.00
crf450r header (no dents)......40.00
2006 crf450x motor mounts........15.00
all mounts from when crf450r motor was removed from quad...........GOES WITH FRAME

[Moparkido]

What are the adjustments on the front shocks?

[step869]

they just have the compression rebound settings 1-10

http://i101.photobucket.com/albums/m76/step869/0111001037.jpg

[davidhoe]

can I get some pics of the rear wheels

[quadracer118]

pics of the front douglas wheels quader28@yahoo.com

[step869]

rear rotor and billit gas cap picks requested ( i dunno if rotor will fit a 400ex sry )
http://i101.photobucket.com/albums/m76/step869/01140014152.jpg

[step869]

douglas front wheels they have vavle stems on both sides to change offest of wheels
http://i101.photobucket.com/albums/m76/step869/0114001426a.jpg
http://i101.photobucket.com/albums/m76/step869/0114001426.jpg

[KEVIN300A]

why you parting out all your hybrids man??

[step869]

KEVIN300A I GOT LAID OFF MAN NO WARNING NOTHING HURTING FOR CASH AND I GOTTA GET MY RACES BIKES DONE FOR THIS SEASON

[step869]

rear itp 9 inch bead locks w/ baja on rear side
http://i101.photobucket.com/albums/m76/step869/0114001438.jpg
http://i101.photobucket.com/albums/m76/step869/0114001443.jpg

+2 tie rods with ends and billit brake pedal
http://i101.photobucket.com/albums/m76/step869/0114001440.jpg

stream line ss front brake lines +2
http://i101.photobucket.com/albums/m76/step869/0114001442.jpg

[protraxrptr17]

Can i get a measurement on that rear shock? I need the length of the body, from the start of the threads to the seal head and then the eye to eye.

[step869]

its 10 3/4' for the body and 15' eye to eye

thanks,
john

[rayman375]

Are these for 250R?
lsr sprocket hub
lsr rear brake hub
lsr steering stem clamp
lsr antifade lock nut.......50.00 ALL
I will take the billet brake pedal.

[step869]

Are these for 250R?
lsr sprocket hub
lsr rear brake hub
lsr steering stem clamp
lsr antifade lock nut.......50.00 ALL

they are for a 250r axle and setup so im going to say yes
but theres a misprint there the lsr steering stem clamp does not go with that and that will be 63.00 shiped

[rayman375]

Post up pics or send me pics of the lsr axle pieces, I will most likely take them with the brake pedal. Is the pedal cracked anywhere?

[step869]

frame
http://i101.photobucket.com/albums/m76/step869/0728091039.jpg

swingarm
http://i101.photobucket.com/albums/m76/step869/0730090701b-1.jpg

lsr axle pieces
http://i101.photobucket.com/albums/m76/step869/0114001958.jpg

[rayman375]

I'll take the lsr axle pieces and billet brake pedal, pm me a shipped price on all of it shipped together.

[step869]

hold off on everything deposit just made on complete quad complete quad sold possibly

thanks,sorry,
john

[jordan 23]

i seen what you said but i was wanting to ask if its not sold how much on the swingarm and it looks like one for a ltz 400

[step869]

sold quad 2 day sorry.................