PDA

View Full Version : New clutch lever?


tom400ex
01-21-2003, 01:44 PM
I'm finally getting aroung to getting a parking break block off and i want the smoothest clutch to get. Right now i have the stock and it is hard to pull.
What is the best and easiest to pull lever?
and
when i remove the stock lever and perch does that change anything like being able to start in any gear? I head something like that once...
Sparks425Ex
01-21-2003, 01:49 PM
Just get a stock Cr250 Lever.

I am runnning a PEP lever and it is a great pull.

If you want somthign really smooth then get a hydrolic lever.

Sorta pricey tho.
01-21-2003, 02:37 PM
Buy a calbe luber also...if your cable has crap in it..no clutch lever in the world is gonna help... Just buy a CR250 lever and perch and a block off plate..quadshop can help ya out with that..;)
James70214
01-21-2003, 03:49 PM
get this Works Pro Connection lever. Only downfall is it retails for like 130
pairanutz
01-21-2003, 05:28 PM
I USE A MOOSE ADJUST ON THE FLY CR PERCH- LEVER EASY AJUST AND CHEAP PRICE BUT EXCELLENT QUALITY-EASYER TO PULL THAN STOCK
Colby@C&DRacing
01-21-2003, 05:33 PM
All the lever that other guys listed are good in my opinion the hydrolic clutch is the best but it is spendy. The only mod that you will have to make to get your bike to start in gear is the cut the two wires that go to the stock perch and wire them together.
AndrewRRR
01-21-2003, 05:39 PM
I have RTC levers and like them a lot. It's like $55 for the perch/lever. Get a new cable and lube it up too. For the $15 or so they cost it's cheap insurance.
Juggalo
01-21-2003, 07:54 PM
the asv lever is the best lever out there thats not hydrualic. my friend has em on his CR's and they rule. their pricey tho. if you get afford em i say buy em!
gojk
01-21-2003, 08:45 PM
Here is the MSR Raptor. Haven't got to try it yet. I will let you know. BTW, how does the Trans blue PC on it look? That is one of the first parts I have PCed.
Juggalo
01-21-2003, 09:06 PM
gojk- i have the msr and i really like it, if you get it dialed in right you'll like it too.
AndrewRRR
01-21-2003, 10:42 PM
One of my riding buddies had MSR raptor levers on his banshees. One day he was walking through the shop and just squeezed the clutch lever in on one and it fractured and threw a couple hunks of cast aluminum across the floor. After that he took the levers off the bikes and put the stock ones back on. Hopefully it was just a freak defect in one.