shadd_27
01-10-2010, 11:27 PM
i just purchased a 2009 450sx from arizona i live in ohio
they had to unplug wires and drain all fluids to ship it and it seems to have everything hooked up correctly now its getting spark and fuel kill switch is hooked in run switch is in on position and key is on
when i hit the start button nothing happens so i tried hitting both terminals on the solenoid to see if it would turn over at all and it does but wont start i tested polarity of all wires and they come back ok im not sure if i have a main ground problem or what
it also has a aftermarket mapping switch ran into it for higher rpms and headlight unplugged and the guy i got it from also made a closed circuit for the nuetral safety switch
looking for any ideas on where to go from there or where i can get a wiring diagram for the quad to know exactly what im looking at.
im thinking of taking off the stock start button with light switch and engine stop/run switch and running it direct for starting only dont need the lights and stuff
please help im stumped
they had to unplug wires and drain all fluids to ship it and it seems to have everything hooked up correctly now its getting spark and fuel kill switch is hooked in run switch is in on position and key is on
when i hit the start button nothing happens so i tried hitting both terminals on the solenoid to see if it would turn over at all and it does but wont start i tested polarity of all wires and they come back ok im not sure if i have a main ground problem or what
it also has a aftermarket mapping switch ran into it for higher rpms and headlight unplugged and the guy i got it from also made a closed circuit for the nuetral safety switch
looking for any ideas on where to go from there or where i can get a wiring diagram for the quad to know exactly what im looking at.
im thinking of taking off the stock start button with light switch and engine stop/run switch and running it direct for starting only dont need the lights and stuff
please help im stumped