foot peg bolts

[bansheemorphine]

I've always seemed to have problems with my foot peg bolts coming loose and sometimes pulling right out on my 400ex and now my 450r. On both bikes i had ac nerfs, not sure if this is what did it or what. I've got some pro armors on the way for next season.

Has anyone else had trouble with stripped foot peg bolts? How did you fix it?

[race dad]

Ihad the same problem with my 450r w/ac nerfs . I wallowed out the rear hole and inserted a bolt and mig welded it in then welded a washer outside of that .Replaced with pro- armor and havent had a problem since GOOD LUCK~~~~

[bansheemorphine]

I don't quite understand what you mean, do you have any pictures of that setup

[chillinsk8err]

just get some blue lock tight if that doesnt work then get red. red will def hold it in there

[race dad]

Ihad problem with the nut in the frame broke loose if your only having trouble with bolts coming loose try locktight as chillin is saying ,,hopefully this helps... If your bolt is stripped you may have to drill it out a bit larger and weld in a new nut and collar w a washer...