cataway
01-01-2010, 03:11 PM
if to have ever taken your clutch apart you may of found that one of the plates ,with the taps on them , was different .
what it says in the manual:
-Be sure to install the drive plate with an inside diameter of 122.5mm (4.82in) first
-two different types of drive plates or used: one(1) with a 122.5 (4.82) inside diameter and seven(7) with an inside diameter of 116mm (4.5in)
you really do not need to worry about the one different plate .
its made that way for shudder springs ,ltz's dont have shudder springs. drz400's do .(drz's are 2 wheel things)
what it says in the manual:
-Be sure to install the drive plate with an inside diameter of 122.5mm (4.82in) first
-two different types of drive plates or used: one(1) with a 122.5 (4.82) inside diameter and seven(7) with an inside diameter of 116mm (4.5in)
you really do not need to worry about the one different plate .
its made that way for shudder springs ,ltz's dont have shudder springs. drz400's do .(drz's are 2 wheel things)