Lots of 250r and Hybrid parts

[hontrx265r]

I'm selling off and parting out a few things I have. All of my stuff is in great shape. Have a lil one on the way I will post pics as I go through stuff I have a large stock pile of parts.

2003 Lonestar 250r geometry hybrid frame. Has slotted lower motor mount (newer style) fits the yz400/426/450 motors. The frame is in good shape, but I have modified it and it was done professionally the welds and work is excellent. Boxed in the swingarm pivot points and sixpointed the subframe.

Lsr Dc4 no link swingarms (2) one stock length chrome and one raw metal -1.

Lsr Dc4 +4+0 a arms new never used. But I don't have tierods (SOLD)

Lsr +4 axle

Lsr black powdered antifade nut.

Rpm Dominator +2 axle with double wide racing sprocket hub (SOLD)

Custom Axis fully adj. fronts 19.25in just serviced (SOLD)

Elka no link rear 18.5in triple rate fully adj. ( not elite)

Pep rear yzf link 18 5/8 zps fully adj.

Walsh steering stem, with or without oversized bar clamp

400ex spindles

Yzf Intake with cr500 boot (SOLD)

Yzf White bros headpipe (SOLD)

Nacs billet front hubs/ black caps with new bearings in package still (SOLD)

Fullbore silver plastic with m#ul tech atv carbon scooped hood (qt copy) will sell hood seperate has one small stress crack but its barely noticeable.

1989 seat pan with foam and quadtech all black cover
Billet seat latch (SOLD)

AC racing black powdered front bumper and a couple sets of AC propeg nerfs

1999 yz400 motor (may be a stroker) it was one of dana creech's motors back in the day and has just been sittings but its in great shape. I added a hinson basket and sfb billet covers to it. Has tc ported head with ti retainers and springs. (no decomp cam just normal.. I know they have been worked though because they are engraved)

2006 yzf450 has fresh crank, cp piston, hinson basket and rekluse clutch with billet cover. Head is all stock.

Ims clear (natural tank) This tank was new less then a year ago and has always been inside so its in perfect condition.

Fcr carbs one that will go with the 450 and two others one older style down draft that has been bored.. (was with the yz400 motor) and another newer from 2001 426 with hotstart on the side.(01 carb SOLD)

This is a pretty good start let me know if your interested. . I will get pics and prices. I'm negotiable on everything so I'll take offers as well. Just be reasonable.
Thanks
Mike

[yz450hybrid]

hey mike,

I'm interested in the gas tank, ac black bumper, and
seat also.

[800screws]

can i get pics of the a-arms, front bumper, nerfs(if they are pro pegs), nacs hubs...prices...
bdzierzek@hvc.rr.com

r u sure the arms are +4's? do u know how long the tie rods need to be?

[ballzdeep38]

im looking for a 250R Thumb throttle if you happen to have one...

[hybrid.mx.11]

hey ive got a yamaha 400 motor i would be willin to give you for your hubs all the way around either way leme know what you want for them

thanks

[mdickerson319]

Pic and price of radiator and anti-fade.
mdickerson319@yahoo.com

[Falcon Fan]

whats size are the carbs and what prices you looking to get ?

how much for both motors but not a total price just each

[hontrx265r]

I'll get some pics by tomorrow... all the carbs are 39mm except the one that goes with the built 400 I think its a 41mm I'll measure it. I don't have a radiator I'm only getting rid of some stuff as I'm building a new crf hybrid... I'll pm prices and pics tomorrow for those who asked. Thanks
Mike

[800screws]

???? u get pics yet? do u know how long the tie rods need to be? can u find out plz....

[hontrx265r]

I had to go out of town this morning I get mondays off so I promise guys I'll get them up tomorrow. My weekend is just a little different then most. On the tierods I'll call lsr tomorrow. I can get them for who ever buys the arms without trouble.

Even though it seems Like trading a 400 motor for hubs would be a good trade. I'd rather not because I'm trying to get rid of stuff not collect more. Thanks though.
Mike

[800screws]

?????????????? i need these arms! lol.......

[ml250r]

how much for just the silver plastic?

[hontrx265r]

ok guys here we go some pics, and more to come. Thanks
Mike

[hontrx265r]

axle dominator +2

[hontrx265r]

less then a year old always inside best used natural tank you'll find guaranteed.

[hontrx265r]

nacs hubs

[hontrx265r]

yzf intake came from my lsr 250r geometry frame fits perfect!

[hontrx265r]

trx450r blingstar heel guards

[hontrx265r]

pics

[hontrx265r]

walsh stem

[hontrx265r]

stem

[hontrx265r]

yzf heads

[hontrx265r]

jp stem clamp

[hontrx265r]

propeg nerfs

[hontrx265r]

lsr swingarm -1 dc4

[800screws]

pm'd u back...

[Fear250r]

Interested in the seat, could you shoot pics to Beauch412@cox.net Also, what are you looking to get for it? Thanks

[troybilt]

How much you looking to get for the front shocks? What are they set up for MX, XC, weight etc...?
Thanks, Troy

[norcalduner]

pm sent

[hontrx265r]

Norcal pm returned

Axis shocks were mx 200lb rider. I used them on my laeger protrax. They work excellent I actually just had two sets so I'm selling one. They are in great shape and I've always been happy with them.
650.00
700.00 with almost new quadtech carbon guards.

[redteamgo2000]

how much for the hood and is it the black or red carbon fiber or painted? pics to redteamgo2000@yahoo.com

[hontrx265r]

trx310 your mail box was full but 75.00 plus shipping on the bars.

[hontrx265r]

The hood is carbon i noticed it does have a slight stress crack in it that is barely noticable 100.00. I'm still working getting the rest of this stuff posted.

[hontrx265r]

Here is a pic of what the bike was... if its not listed its not forsale though. Remember I'm building another one here. Thanks
Mike

[250x_kyle]

how much for the frame, regular swingarm, and the 01 426 carb. seperate prices if you would. thanks.

[hybrid.mx.11]

what do you want for the hubs front nacs 47670 leme know

[hontrx265r]

hybrid.mx.11 your pm box is full. I think I've returned everyone elses pm's if not just let me know. Thanks for your interest.
Mike

[tmccaughin]

do u still have any pro pegs left
thanks
tim

[walsh302]

send pic of fenders to nmccracken1@verizon.net

[hontrx265r]

Walsh302 I just have to clean them up today and I'll have pics for ya.

I updated the post and here are a few more pics you all have asked for. Thanks

[hontrx265r]

Seat and 1989 Pan

[hontrx265r]

Axle

[walsh302]

ok cool do u have any crf 450 motors i need one

[woodsracer144]

how much do you want for the 400f?

[stuntin andy]

pix and price on the hood?

[Motofool250r]

still have the rear shock?

if so PM with if it will work ona regular 250r setup i have a JP racing stock and no link frame

[205dke187]

do you still have axis fronts?

[hontrx265r]

Axis front are Sold,
The Rear was not forsale.

[stuntin andy]

pix and price on hood??

[LONG-ROD]

could you give me price on lsr axle, both swing arms, and rear shock for no link set up, thanks. pm me please.

[ajaxs]

Originally posted by hontrx265r
pics

how much for the heel gaurds?

[mooseracerX]

Do you still have the Walsh stem? If you do would it fit a 400ex?

[hontrx265r]

lsr axle 150.00 plus shipping. The chrome swingarm is sold. The other I'd like 300.00 obo. I do still have the walsh stem (and I'm suprised usually if its walsh its sold) but I have no idea if it will fit a 400. My vote is no?

[hontrx265r]

The heel guards.. just make an offer. Just make it worth my while to put them in the box and you pay the shipping.

[mooseracerX]

How much would you like for the stem? I looked and it is the same diameter and the bearing are the same to so it should fit, also there was a thread on this site I looked at that said it should.

[LONG-ROD]

is the axle in good shape. will it work with a 250r carrier. also is the swinger the bare metal one.. what size shock does it take. do have a shock you can sell that will work..

[jsracing2]

how much for the -1 no link swinger and rear shock to match?

[revman]

pm me your paypal and ill send money for hood if you still have it. thanks

[mohler]

Do u still have the lsr frame?

[khms]

Still have the plastics and hood if so how much for all

[hondaquad74]

do you have the rear brake caliper and if so how much you want for it

[bikebuilder]

mike, tried to send a message to you but mail box is full. can you send pics to pmlatko319@yahoo.com thanks patrick

[smglamis]

I would like to see a pic of the pro pegs. I'm really interested in a a pair. Also the price? Thanks

[mineralgrey01gt]

im also interested in some pro pegs. I need a set for my build

[micek05]

do u have the upper mount for the steering stem?

[bikebuilder]

hey mike it is patrick in nj just wanted to see if you had got some pics for me please let me know thanks

[foti55]

can i have some pictures and prices of the frame and o6 motor i have a lsr frame but a 03 engine(yzf) and i was wondering if your 06 motor would fit in it?
pictures to foti55@yahoo.com

thanks for your time