Need help

[minuga]

Hi

Need help with rod ends. What rod ends use in a-arms(size)?

Happy new year and good raicing year:)

Thanks

Juri

[Ride1Rob]

I measured ours and they're 10mm
http://www.vxb.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=bearings&Product_Code=POS10&Category_Code=HR

[minuga]

I mean what size in inches. orignal is M 10x1.25 but this size hard to find.

[Ride1Rob]

The link I posted is what you need. I don't get what else your asking for.

[minuga]

Yes they are 10 mm, but in my aarms thread is 1.25mm not 1.5mm.
i mean what size in inches are replesment for my aarms

thanks

Juri

sorry for my bad english

[Ride1Rob]

In your original post you stated you need rod ends. Now what you're describing is that you need ball joints for your arms. Do you need both? The tie rod ends should all be the same size. As for the a arm ends if you have a copy it's gonna be difficult answer unless someone here has that copy and knows the exact size.

[minuga]

I found what i searching:)
Thanks for you help

[Hondo121]

No good deed goes unpunished