OEM short rod rebuild kit.

[Rich250RRacer]

I was going to buy this and just throw it in with my other NOS stuff that I've been collecting, but other projects need the money so I'll pass it on to somebody here. This kit is NOS Honda for a CR250 and if you know R motors, you know this will work. These are pretty hard to come by, but a must have for anybody who like the short rod crank.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=160388163476&viewitem=&sspagename=STRK%3AMEWAX%3AIT

[deathman53]

Is is discontinued? Service honda shows it in there site. Don't all the cr250's use the same short rod?

13200-KA4-741 ROD, CONNECTING 96.2 72.49

[Rich250RRacer]

Originally posted by deathman53
Is is discontinued? Service honda shows it in there site. Don't all the cr250's use the same short rod?

13200-KA4-741 ROD, CONNECTING 96.2 72.49

It's still a valid part number, but it is dicontinued. The CR's are all short rod, but Honda only offered the rebuild kit for the earlier models, after that they sold the whole crank, like the 250R. This would be much better than going with an aftermarket kit or crank.

[All250R]

There is a year of the CR rod you can still get at least as of a month or so ago. It doesn't come with thrust washers though. If you want to know the part number PM me and I'll look it up for you.

[All250R]

Originally posted by deathman53
Is is discontinued? Service honda shows it in there site. Don't all the cr250's use the same short rod?

13200-KA4-741 ROD, CONNECTING 96.2 72.49
The dimensions for the rod are all the same probably from 84-01, but for some reason I don't know of Honda has different part numbers for different year spreads.