Checkin Interest-trade 06 Yfz For Trx

[TRXman86]

I am looking to see who may be interested in swapping my 06 MX ready YFZ for there TRX of close/similar value. Prefer an 05+ NOT beat to hell!!!

My list of mods is below... For pics, reply here/PM and I will post them up...

-I WILL NOT CALL YOU-SEND PHONE PICS- i would rather keep everything on here so everyone knows whats up... For feedback purpose of course!

Chassis | Suspension | Controls:
Frame: stock-white with black sub frame and black swinger
A Arms: HOUSER LT'S
Swing arm: stock
Steering Stem: stock
Axle: RPM Dominator II
Carrier: stock
Locknut: stock
Hubs F|R: stock
Bars: Pro Taper Contours-new
Throttle/Clutch Lever: ASV PRO'S
Grips: Scott med.-new
Nerfs: AC Pro Pegs
Bumper: AC
Grab Bar: AC
Front Shocks: Elka Quad Rate/LT's
Rear Shock: stock/dual rate LT/ZPS
Brake Lines: stock rear/Galfer Braided fronts
Rotors F|R: stock
GBC pads F/R
Rims F|R: front Hipers w/ Maxxis RazrMX 20x10-Dual beadlok Hiper rears w/custom grooved RazrMX 18x8
Tires F|R:
Modded throttle spring
AC full belly skid

Body:

Plastic: Stock trimmed race cut
Graphics-Seat-Cover: stock

Bar Pad: Pro taper
Fuel Tank: stock

Engine-Drive System:

Cylinder/Head: oem
Bore & Stroke: stock wiseco piston(i believe)
Displacement: stock
Cam: stock with cam mod
Carburetor: stock/jetted/Tusk screw
Air Filter-Box: Ready/stock
Pipe/Silencer: Sparks Full
Clutch |Plates: Tusk HD kit
Gearing F|R: 14-15/38-depending on track conditions
CDI/Kill switch: stock/Universal
Cooling: stock/Engine Ice
valve job

***ALSO*** The ball joints and full bushing kit for the arms will be all brand new! i am in process of buying them now. Also new houser tie rods. I also have a stock front end coming from MXPIMP on here. May also have some other smaller stuff to throw in... WILL NOT SELL OUTRIGHT UNLESS YOU HAVE $4500!!!!

[TRXman86]

***will have houser arms not the ones on it in pics. It will also have brand new chain and sprockets***

http://img.photobucket.com/albums/v94/atvmxrcr86/Picture051-1.jpg
http://img.photobucket.com/albums/v94/atvmxrcr86/Picture053-1.jpg
http://img.photobucket.com/albums/v94/atvmxrcr86/Picture054-2.jpg
http://img.photobucket.com/albums/v94/atvmxrcr86/Picture057-1.jpg

[TRXman86]

up up up

[TRXman86]

Motor WILL be fresh before any deals are carried thru. I am putting a new piston and rings in it, and having the valve seats cleaned and new valves if they are needed. It will be ride ready when it leaves depending on how soon anyone wants to deal... If anyone has a stocker, I can take some stuff off mine to match a price. Like the hipers and front end. I can send it with a stock front end and stock wheels/tires. Not a big deal to me. I can also put on stock bars since the Pro Tapers only have 2 races only on them.

...Looking to deal...

[TRXman86]

Here are some shots of the front end "LOOSELY" on the quad. Been to dam cold to get it 100% finished... I have new bolts for lower mounts and tons of new bolts for the plastic also. Some were stripped right at the tight spot, so I figured I'd replace em....

There are wear marks on the arms with some dings. The BJ's are TIGHT, bushings are tight, dang near like new besides worn powder. Shocks are nice and tight as well. Almost like they were take offs to be honest... but HAVE been used. I have 110% trust in using them for all my XC races. And I am hard to impress... REAL HARD!!! So for this to be a full XC quad also(for a newer trail racer) all you need are tires :D Which is on my list to get next. Well worth the $4500 line and more... All I want is a MX OR XC ready 450r... Don't even have to be pro material...

WHAT YA GOT!!!!
http://img.photobucket.com/albums/v94/atvmxrcr86/Picture077-1.jpg
http://img.photobucket.com/albums/v94/atvmxrcr86/Picture078-1.jpg
http://img.photobucket.com/albums/v94/atvmxrcr86/Picture079.jpg
http://img.photobucket.com/albums/v94/atvmxrcr86/Picture080.jpg

[TRXman86]

up again

[TRXman86]

New additions to the list of extra's:

AM Racer's fronts with 3 races and rears with 5 races

New JE Piston/rings and other goodies the motor needs (heading to the shop in a few days)

Hiper rear mud plugs (clear with tabs and all the goodies needed to instal)

Possibly more in a few days... Tax money ROCKS!!!

With everything I have one it, all the extras I have and the stuff on the way here now, I can't take less then $5000 for it. And that's still not getting back what I have and will have sunk into it within a few days... Will consider selling with either a FT set up (less lowering kit and sway bar which I don't have... YET), as an XC ready ride, OR as a MX ready ride... Any option will work for the right $$$

Once everything is done, I will get new pics....

[TRXman86]

LOOKING TO DEAL REAL SOON!!!!!

Motor is done, only have rear SS line to install and new brake pads...

[TRXman86]

Bike is going BYE-BYE today at my local dealer. All my extra stuff will be sold seperate (besides flaqt track tires).

If anyone wants a kick arse deal, contact me on my cell BEFORE 11 am today CENTRAL time. I am willing to send EVERYTHING with it (minus flat track tires) for teh right deal. I have my new Kenda XCR's also. Still wrapped up....

GET WITH ME ASAP IF YOU WANT IT... WILL BE UP ALL MORNING SO YOU CAN EVEN TEXT/CALL ME NOW!!!

AND... I'll be trading for a bone stocker.... I'd much rather trade everything for a good XC bike... HELL OF A DEAL HERE!!!!