blaster hubs can you help me???

[asohagan]

i need a set please let me know

email sohagan003@gmail.com or text 405 201 5158

[redteamgo2000]

just get a set off of a trx250r for the rear it fits right on same splines. i just did this for my g/fs blaster because its easier to find honda bolt pattern wheels.

[ZSK]

The 250R has a 25 spline hub the 300ex/250X has a 24 spline hub. The Blaster is also a 24 spline.

[redteamgo2000]

huh thats odd then these went right on? no slop and are tight on the splines.

[ZSK]

400ex hubs are also 24 spline, it's possible that you have a 400ex axle in your 250R. I was running a 400ex RPM axle when I had my 250R.

I've tried honda hubs on a blaster and it's about a 50% success rating if they fit on the axle or not. If you can find some heavily used ones the ID seems like it gets worn a bit more and will slip on. The newer hubs were always too tight to fit. I like to stick to the yamaha hubs for a 4/115 pattern but this time I'm using LSR YFZ hubs for a 4/110 pattern to match the Rath hubs on my predator.