Noise!

[coryatver]

I just changed my sprockets and chain and now when i ride it and hit the gas it makes this clicking noise and then it goes away. I took a closer look and the chain seems to be hitting the case saver. I can also see where it has been rubbing on the case saver because the metal is shiny. I took it off because i thought it wasn't on right but it is the only way it will go on. Is this normal and just something i never noticed before or what?

[400exdad]

You should not be having a problem unless you went with a 16 tooth front sprocket. The stock casesaver will not work with more than a 15 tooth front sprocket.

[coryatver]

It is a 15T sprocket. It is starting to get annoying. It touches the chain right above the shift lever.

[400exdad]

Hmmm, well I'm not sure about that maybe someone else could help. Are you running stock ride height? Did you increase the sprocket size on the rear?

[coryatver]

Everything is stock.

take your case saver off and check the bolt so see if there bent.i threw my chain on time and it bent the saver bolts and now i took it off to keep it from rubbing

[51]

well a week ago i popped my chain and it doubled up and hit the case saveer..and bent it so the top was hitting the chain...i tried everything diff bolts and everything..well i put it in a vice and bent it lightly... now it clears teh chain fine... i'd try that and if it don't work try a new case saver