Lever Swap

[zip69_1999]

Just curious, wanted to get rid of the bulky clutch w/parking brake bar mount and get a cleaner look, also one for the brake. Any suggestions, I have the stock bar, are there any direct swaps or do I need to buy the high dollar mounts?

[honda400ex2003]

you dont have to get high dollar mounts sincce you can get some of them pretty cheap but yeah you can get rid of the whole cluster, get a brake block off or just unscrew the bolt for the parking brake enough that it will not hit the pad, and get a matching brake lever for the bars. you can get kits with the levers and such on ebay also. i have the asv stuff and really like them but you will pay a bit for them too. steve

[Sinister95Z]

To do this project on a budget, try this set-up or something similar.

This lever will give you adjust on the fly capability and will give a nice clean look :
http://www.rockymountainatv.com/productDetail.do?&navType=type&webTypeId=189&navTitle=Handlebars-Control&webCatId=12&prodFamilyId=11631

Since you will be getting rid of the parking brake cable, this is the cheapest block off that I know of. It looks good and has recessed bolt holes :
http://www.rockymountainatv.com/productDetail.do?navType=type&webTypeId=28&navTitle=Brakes&webCatId=15&prodFamilyId=3050#vehicleSelect

[honda400ex2003]

those two would work out perfectly for you. steve

[togup]

i got my asv levers from ebay i think they were reconditioned but mine were still in the asv package mine were dirt cheap like $30 a piece ;type in asv levers then just look for 400 ex so that the cable end matches your factory ones

[nastyrider17]

I got sick of the space from the parking brake so I took an old short BMX lever and hooked it up to the reverse. I hated having to reach my hand down every time I wanted to go in reverse.