fx4pitrone
12-14-2009, 06:55 AM
I'm parting out my restored 89 LT250r....Couldn't sell it whole and I need to fund my next 88 build (which will be faster and better and be Q-piped!)
I will let it go whole for $2000 whole or part it out. Here is a list of what it has:
COMPLETE MOTOR- $600 shipped, includes kicker, shifter, reedcage (and your very own Coleman $25 Ice Cube cooler for beer afterward!)
• Motor recently rebuilt (about a year ago by previous owner), crank bearings are good and tight... don't know bore
• No cracks/welds in engine cases… Original case saver and clutch cable holder in tact, motor is really in good shape
-No leaks, literally has less than hour on it since restore, always fired right up, shifted fine through all the gears, never a problem, but again, don't know what previous owner rebuilt and didn't, Motor was run w/ Maxima Castor 927 at 32:1 with 93 octane
Everything has less than one hour of ride time, and only on road and parking lot, never seen a trail since restore!
FRAME- $175
• 1987 frame-gusseted for durability *includes SB designs steering stem bushing, and pegs
• Was sandblasted, 2 coats primer, 4 coats of metallic candy blue, 5 coats of clear
Stock A-arms w/ fresh silver paint and clearcoat w/ ball joints and all brand new All Balls bearings and seals-$175
Front Hubs w/ rotors and brand new All balls bearings- $45
Front Brake Calipers: rebuilt and greased w/ new pads $75
Spindles $40
Tie-rods, painted silver w/ clear $35
Working Headlight w/ guard $40
Rear brake lever, painted silver w/ clearcoats $35
Front shocks $75
Rear shock $80
Rear hubs, painted candy blue w/ clear 5 lug $25
Newer FMF Fatty Pipe and silencer, $100
Brand new K&N air filter $30 Shipped
Brand New front (12) and rear (42) sprockets and chain $95
Brand New Tusk aluminum handlebars w/ Thor pad $25
Stock Carb w/ Brand new fuel lines (prob needs to be cleaned after sitting for a while now) w/ Polished aluminum OEM throttle and brand new Motion Pro throttle cable $100 Shipped
Brand new OEM wiring harness $25 Shipped
Brand new Kill Switch in Pkg. $20 Shipped
Brand new Longhorn clutch lever/perch, blue anodized w/ brand new motion pro cable $30 shipped
Brand New Braided Stainless steel brake lines, Front (w/ T-block) and rear $80 shipped
Brand New aluminum brake line clamps $25 shipped
Yellow OEM plastics off 92, no decals or cracks in rear, front has small crack along where nosepiece goes, has 92 camo graphics on front $200 for both
Blue hood, no cracks, has some holes drilled in it from previous owner $20
Front Holeshot XCT's 22x7x10, about 75% tread, w/ stock rims.. no plugs, hold air fine $90 pair
Rear grab bar w/ stock fender supports, and tail light, painted candy blue and cleared, $50
Swingarm w/ new Pivot Works bearings/seals and carrier (not new bearings), adj. plates were painted candy blue and cleared $175
Axle, straight $80
Airbox w/ lid and tubes (airbox has small burn hole from pipe) $35
Run, light, on/off switch $35
Motor mounts, painted silver and cleared, $25 shipped w/ stainless bolts
All prices w/o shipping unless it says w/ shipping...
I'm prob. forgetting stuff, so if you need something else, let me know... it's gotta go!!
I will let it go whole for $2000 whole or part it out. Here is a list of what it has:
COMPLETE MOTOR- $600 shipped, includes kicker, shifter, reedcage (and your very own Coleman $25 Ice Cube cooler for beer afterward!)
• Motor recently rebuilt (about a year ago by previous owner), crank bearings are good and tight... don't know bore
• No cracks/welds in engine cases… Original case saver and clutch cable holder in tact, motor is really in good shape
-No leaks, literally has less than hour on it since restore, always fired right up, shifted fine through all the gears, never a problem, but again, don't know what previous owner rebuilt and didn't, Motor was run w/ Maxima Castor 927 at 32:1 with 93 octane
Everything has less than one hour of ride time, and only on road and parking lot, never seen a trail since restore!
FRAME- $175
• 1987 frame-gusseted for durability *includes SB designs steering stem bushing, and pegs
• Was sandblasted, 2 coats primer, 4 coats of metallic candy blue, 5 coats of clear
Stock A-arms w/ fresh silver paint and clearcoat w/ ball joints and all brand new All Balls bearings and seals-$175
Front Hubs w/ rotors and brand new All balls bearings- $45
Front Brake Calipers: rebuilt and greased w/ new pads $75
Spindles $40
Tie-rods, painted silver w/ clear $35
Working Headlight w/ guard $40
Rear brake lever, painted silver w/ clearcoats $35
Front shocks $75
Rear shock $80
Rear hubs, painted candy blue w/ clear 5 lug $25
Newer FMF Fatty Pipe and silencer, $100
Brand new K&N air filter $30 Shipped
Brand New front (12) and rear (42) sprockets and chain $95
Brand New Tusk aluminum handlebars w/ Thor pad $25
Stock Carb w/ Brand new fuel lines (prob needs to be cleaned after sitting for a while now) w/ Polished aluminum OEM throttle and brand new Motion Pro throttle cable $100 Shipped
Brand new OEM wiring harness $25 Shipped
Brand new Kill Switch in Pkg. $20 Shipped
Brand new Longhorn clutch lever/perch, blue anodized w/ brand new motion pro cable $30 shipped
Brand New Braided Stainless steel brake lines, Front (w/ T-block) and rear $80 shipped
Brand New aluminum brake line clamps $25 shipped
Yellow OEM plastics off 92, no decals or cracks in rear, front has small crack along where nosepiece goes, has 92 camo graphics on front $200 for both
Blue hood, no cracks, has some holes drilled in it from previous owner $20
Front Holeshot XCT's 22x7x10, about 75% tread, w/ stock rims.. no plugs, hold air fine $90 pair
Rear grab bar w/ stock fender supports, and tail light, painted candy blue and cleared, $50
Swingarm w/ new Pivot Works bearings/seals and carrier (not new bearings), adj. plates were painted candy blue and cleared $175
Axle, straight $80
Airbox w/ lid and tubes (airbox has small burn hole from pipe) $35
Run, light, on/off switch $35
Motor mounts, painted silver and cleared, $25 shipped w/ stainless bolts
All prices w/o shipping unless it says w/ shipping...
I'm prob. forgetting stuff, so if you need something else, let me know... it's gotta go!!