houser a-arm bushing replacements?

[riderssb250x]

i need to do bushings on my a-arms i have houser long travels and i was wondering can you use like an all balls kit or an afretmarket kit for a 400ex or does it have to be from houser? i looked on houser they no longer offer the delrin bushings as a replacement its a bearing kit wit sleeves and stuff and just doesent look anything like what i have im in a jam i want my quad back together!! someone help pleasee

[gt400ex]

Any bushing set should work in there.

[siggy konowaluk]

im getting new a arm bushings as well soon, i have stock a arms but im pretty sure any busings will work. good luck!

[riderssb250x]

so the kits on atvbushings.com for a 400ex would work on my housers? or any kit for a 400ex can anyone else verify this? that i dont need to buy direct replacements from houser. thanks everyone by the way!

[riderssb250x]

bump .... can anyone help me answer this for sure i emailed houser and got no answer

[Langbolt]

Do you have access to a Vernier Caliper ?

If So.....measure the I.D of the A-Arm where the bushing presses in.

Then Measure the Diameter of your Crush pin.

Do the Bushings have a FLANGE ? If So...measure it.

Then go to :

http://buntingbearings.thomasnet.com/viewitems/powdered-metal-bearings-and-thrust-washers/bronze-flanged-bearings-sae-841?&plpver=10&forward=1

Look up the size you need and order them.



:devil:

[quad2xtreme]

Originally posted by riderssb250x
bump .... can anyone help me answer this for sure i emailed houser and got no answer

Call Houser and talk to Jen.