hetrick pipe???

[diablo14]

i have a 08 a/c drr50. and i also have a 02 polaris 90 with a hetrick pipe. the will that pipe fit the 50 and will it be worth the time of changing them?... the 50 has a ported cylinder 70 kit and clutch work...

[THARNESS]

It should work great. Only takes a few minutes to try. I'd give it a shot.

[kfx450]

i am going to try the same pipe on an 09 50 with a stage 6 cylinder

[diablo14]

im goin to try and put ti on there tomorrow but as cold is it is outside i dont know when ill get to run it so let me know if you do put it on!

[kfx450]

put the pipe on. It was a really tight fit. head pipe touches the frame and the next part is touching the water pump cover. also the main body of the pipe is on the frame while plastic seams to be pushed up just slightly. I also had to make a small bracket to mount the silencer. I think that I read some where you need to cut some of head pipe to get these to fit better on certain applications.

there is definetly a different sound to this pipe. seams to have a litle more powere then the stock pipe on this setup. This is with me riding it though. Won't be able to get the boy on the bike again until we get above freezing.