TT Riders, I have a question

[06 Honda 450R]

Some of you that race tt have a minus 2 swinger, well with mine when my rear suspension compresses the break caliper hits the subframe before i get full stroke, my frame is still 3 inches from the ground. What my question is, is there any company that turns the rear break back so the subframe doesnt hit, i was wanting to make a bracket that rotates the caliper back to where the caliper isnt on top but on the back of the swingarm. If anyone knows of a company that makes these brackets, or you have any input, please post.

[h&h]

get a rear shock that works correctly, and frame should not be that low :)

[06 Honda 450R]

i do have a rear shock that works correctly josh, anyone else

[h&h]

well i have four bikes and i dont have any problems and look at everyone elses bike they dont have that problem...... so u have a big problem sorry :(

[06 Honda 450R]

its not the shock, but the linkage, i still have the adjustable linkage and thought i should get more travel, if not i can readjust the linkage so i get the right amount of travel so the caliper doesnt hit, so no its not a big problem

[yfzttracer76]

fischers cycle did mine for like 10 dollars

[06 Honda 450R]

what did they do

[Mrs. SFRacing]

Set the bike on 2x4 under the back lower a arm tab and under the footpegs with the 1.5 up and down, with the tires on with 10 lb of air,measure ceter to center on the pivot points.Im kinda thinking there is an issue here and josh you may be correct....just maybe.

[06 Honda 450R]

what is the problem, i can adjust the linkage however so that isnt a issue but the only issue i have is the break hitting the subframe