Axis Gibson PRP CRF450 Hybrid part out

[Billroy55]

PRP 250r geometry frame, subframe, no-link swingarm, and intake - 850
Gibson +3 A-arms - SOLD
Axis triple adjust (high/low speed) front shocks, steel springs with x-link - SOLD
Axis compression/rebound adjust rear shock - SOLD
RPM Dominator II axle w/ race hub and wheel hubs, like new - SOLD
Lonestar Carrier - 50
Lonestar Anti-fade - SOLD
AC propeg nerfs - SOLD
400ex spindles, rotors, hubs - 125
400ex front calipers, stainless lines, new master cylinder and pads - 150
250r rear caliper, brake stay, stainless line, master cylinder and gaurd -SOLD
Fullbore plastics and seat - SOLD
Fluidyne Radiator - SOLD
Sparks Exhaust - 200
TC exhaust 225

Motor Is being parted out as well
TC National Head
Kibblewhite stainless valves
Ferrea springs / Ti retainers
RHC 208 cam
Cylinder Works 490 kit
JE 12.5:1 100mm piston
Hot Rods crank
Hinson complete clutch w/ cover
ECA water pump cover
Kicker extender and kicker
FCR carb
Wiring harness and CDI


And anything else I left out thats on this quad...

[Billroy55]

pics.. the stickers on the shock reservoirs are a bit messed up, but thats it.

[Billroy55]

More.

[Billroy55]

More... Email me at hendricks_56@hotmail.com if you want more/bigger pics

[bcapien]

Will the air scoops fit 03 400ex?? If so how much??

[LAEGER525]

PM sent on radiator

[protrax]

interested in the radiator and fullbore plastics

[yz450hybrid]

pm sent

[WISH1965]

pm sent

[davidhoe]

are the front wheels for sale is so please e-mail lindahoe@comcast.net with a price.

[Billroy55]

Im keeping the wheels and tires for now.

[soyo]

how long is the rear shock eye to eye? and the stroke? if the plastic is not sold i will take it and the radiator! thanks

[Billroy55]

I'll measure it tonight and let you know.

[800screws]

i pm'd u about the rear shock already....i'll take it, shoot me your paypal..

[shaungray89]

shocks and a arms how long are the shocks eye to eye and weight set up for i want them if they will work for me best price for both thanks let me know asap

[shaungray89]

mailbox is full

[Billroy55]

cleaned it out, sorry

[Billroy55]

radiator, plastic and rear shock sold!

[Billroy55]

I also have 2 Gibson stabilizers, both recently rebuilt... 60 a piece.

[Billroy55]

a-arms and shocks are sold.

[Rootar]

your inbox is full

[Billroy55]

Already? I'll clean it out now. Thanks

[Billroy55]

I am parting out my motor as well.

[Billroy55]

axle and antifade sold. still have many good parts!

[Billroy55]

bump!

[Pro1200]

price on rear caliper?

[Billroy55]

Bump

[Billroy55]

Heres a pic of what i have left...

Also have a PRP stem and 7/8th bar mount with pro design tether. Stem is barely tweeked, you can only see it if you put a straight edge against it. Dont notice it at all when you're riding - 75 +shipping

K & K stem mount - 10 +shipping

[Billroy55]

Bump...

[Billroy55]

nerfs and bars/handgaurds are sold.

[Billroy55]

Bump.

[step869]

how much for exhuasts buddy?

[Billroy55]

200 for the sparks built for a hybrid. It has the typical hybrid caliper dent in it. Besides that its in good shape.

Also have a tc stainless exhaust that works on it for 275. This one is a 450r. This one is in very good condition.

[Billroy55]

Bump.

[trx/lt500r]

How musch for the frame?
What type of front brakes are those and how much?
thanks

[Billroy55]

800 for the frame, subframe, swingarm, stainless pivot bolt, airbox, intake, motor mounts, and front and rear chain guides.

Front brakes are 400ex. Calipers were rebuilt and master cylinder was new about 15 hours ago. 125 for calipers, dual stainless lines, master cylinder, and rtc adjustable lever. Pads are like new.

[Matthull]

Nerfs? how much shipped to 75098? Do you have all the mounting hardware? Thanks

[Billroy55]

Nerfs are sold

[Trx450mx38]

interested in frame i emailed you

[Frankenstein87]

Can you email me at chrisandmeghann@yahoo.com with a list of everything you have left. Is the motor taken apart? if not, noes it run well?

[Billroy55]

Mx38 I didn't get any email. My email is Hendricks_56@hotmail.com

The motor was parted out and I don't have much of it left. I still have everything in the last picture I posted except for the nerfs, rear brakes, bars and throttle housing..

[Billroy55]

Bump.

[Billroy55]

chassis sold!

[camo450]

how much will you take for the FCR carb??

[Billroy55]

Carb and 95% of the motor is sold. Only have tranny and some little motor parts left.

Heres a list of everything else I have:
Clark Tank with mounts - 70
Shrouds with bottle - 30
Sparks Exhaust - 200
TC Exhaust - 225
2 gibson carriers - 40 each
2 gibson stabilizers - 40 each
400ex Front Brakes complete (calipers w/ new pads, stainless dual lines, new master cylinder and RTC adjustable lever - 125
PRP Stem, no bar clamp - 50
Front Hubs/rotors - 40

[Frankenstein87]

Is your steering stem extended or stock length?

[Billroy55]

The stem is +1 I believe.

[800screws]

ill take the stem...PM your paypal...

[Frankenstein87]

I definitely want the dtem. Send your paypal info to chrisandmeghann@yahoo.com

[Billroy55]

stem is sold. sorry frankenstien, he sent me the money for it before you responded.

[qcitytile]

Would you sell just the stainless front brake lines seperate if so how much?? Thanks

[Billroy55]

Id like the keep the front brakes complete.

[mohler]

do u still have the frame? and where in NY

[lonnie1977]

Do you still have the 4+1 front beadlocks?

[Billroy55]

Frame is gone.. I do still have the front wheels and tires though.

[bikebuilder]

what motor parts do you still have for sale please let me know.thanks