Rear Brake hookup/foot pedal

[goldni0020]

Hey all, Does anyone have a close up picture of there rear brake set up at the foot pedal.

the spring has disconnected from the pedal, so it obviously doesn't work when i hit the pedal bc the wire is just hanging, Ive been searching all over and can not find a close up of how it re connects.
if anyone can point me in the direction that would be great.

i tried to search but since my acct is new i wasn't able to. thanks again!

[NacsMXer]

Welcome to the site :macho

It is quite simple how the spring hooks up to the brake pedal. The end of the spring is hooked and there is a small hook welded to the brake pedal. All you have to do is take a pair of needle nose pliers, grab the hooked part of the spring and pull it down so that it engages the hook on the brake pedal. Simple as that.

This isn't the best picture, but it is straight out of the Honda service manual. Hope that helps you out :)
http://img705.imageshack.us/img705/9854/brakepedal.png (http://img705.imageshack.us/i/brakepedal.png/)

[goldni0020]

yes awesome i was just looking for the location, thanks man!!!!!