Pics of cr ignition set up?

[Honda 250r 001]

does anyone have any pictures of how they put the wiring harness and coil together in their 250r frame? How did you mount the coil? Did you run the stock 250r kill switch? Where did you run the wires? How did you mount the cdi?

One of my problems here is when i removed the stock kill switch, and moved the clutch lever over, the clutch lever is too long! So do i need to get a shorter CR style clutch lever? Did the CR's run a kill switch to take up the spacer or did they run the clutch lever perch right up against the hand grip?

Thanks guys i will try to do a write up of how to do the cr 250 ignition change over with picures when i get done.

[Honda 250r 001]

heres pics of my set up so far. tell me what you think

[Honda 250r 001]

hhhh

[factoryX]

am I missing something here? because I thought it was just the ignition coil(stator) and all you had to do was buy the adapter plate from esr for $79.

[Honda 250r 001]

Originally posted by factoryX
am I missing something here? because I thought it was just the ignition coil(stator) and all you had to do was buy the adapter plate from esr for $79.

nope, you have to change over to the whole thing, wiring harness, cdi, stator, coil, flywheel... its not a complete bolt on mod...