PDA

View Full Version : Kill Switch?


dirtking
12-01-2009, 11:12 AM
Where do you guys get ur kill switches, not the tether switches, but the ones that they put on dirtbikes. The push button kill switches, where could i find them??? oh yea and can the push button kill switches be used for the electric start button????
gtt416ex
12-01-2009, 11:29 AM
i got mine off ebay for about 6 bucks.

here's a list of them
http://motors.shop.ebay.com/i.html?_nkw=CR+kill+switch&_sacat=&_trksid=p4506.m270.l1313&_odkw=CR+Style+kill+switch&_osacat=0
dirtking
12-01-2009, 03:29 PM
can you buy them straight from the people who make them and if so who makes them?
gtt416ex
12-01-2009, 07:32 PM
helix racing and moose makes o.e.m's and sunline makes a really nice billet one.
dariusld
12-02-2009, 10:17 AM
Can you use any of them? Some of them ground, don't they? Heres my non grounding KX kill switch.

Edit This is my electric start.
gtt416ex
12-02-2009, 11:16 AM
mine has a ground wire on it but it still works fine. it came off a cr85
dariusld
12-02-2009, 02:19 PM
Originally posted by gtt416ex
mine has a ground wire on it but it still works fine. it came off a cr85

And you use it as your start button?
honda400ex2003
12-02-2009, 02:55 PM
it depends on how he wired it, i suppose? just like the tether killswitches, it just depends on how it is wired. ill have to think about that for a while. What are you going to use it for dirtking? Steve
gtt416ex
12-02-2009, 03:00 PM
Originally posted by dariusld
And you use it as your start button?

yea, the factory button has two wires running to it and i just spliced them into the kill button wires
dirtking
12-02-2009, 03:29 PM
well i was planing on using one for the kill switch and one for the start button. i dont know if it will work i was just wondering how i can have a kill switch and start button because i am removing my light toggle box??? will it work??
dariusld
12-02-2009, 04:29 PM
Originally posted by dirtking
well i was planing on using one for the kill switch

I use the key for that.
honda400ex2003
12-02-2009, 04:46 PM
i would just use the button switch as the starter, get a tether to wire into the old killswitch on the cluster, and have the key. then you have it set up like Dallas, (honda#4). he used a kx switch for the starter, a motion pro tether i believe and has a key. it works out nicely. at one time i was going to use a high/low beam switch also mounted on the bars, and take the cluster off. steve