Conversion parts for the Blaster

[adamson350r]

I have two blasters that I wouldn't mind fixing up for my daughters and I need the most bang for the buck. What parts will fit the blasters, like suspension. Anyone have a list? Curious about A-arms and Swing arms.

[Big_Guy_Green]

Alot of the chassis parts are similar between Blaster, Banshee, and Warrior. I had a Blaster, and my buddy has a Warrior. We swapped everything from front/rear hubs, axles, brakes, steering stems. Swingarms get to be tricky. We looked at putting a Tri-Z swingarm into my blaster, but with all the work it would've taken to gain +1 inch, it didn't seem logical.

I'd say take some measurements from your Blaster, and go a dealer with a tape measure and pad/pencil and see what'll work. You can dig on the internet at sites like Works and such for shock length. I'm pretty sure you'll need the stock shock length for whichever vehicle donates the arms to Blaster.

Good luck!

[Dylan227]

I run ltr 450 front a-arms on my blaster and a banshee swingarm.

[backwoodsracer]

Originally posted by Dylan227
I run ltr 450 front a-arms on my blaster and a banshee swingarm. \


can i see a picture?