Installing kill switch's

[dads400ex]

I need to hook up a kill switch on a 400EX, the Pro Design instructions say to hook up the long wire to the engine triger pulse wire which in the manual wiring diagrahm I can find a ignition pulse generator that is black with red, is this the wire I need if not which wire is that and how or in what location did you hook it up.

Thanks,
dads400ex

[trailburner]

Click on [FORUM] there is post on kill switch install.click on it will tell you every thing you need to know..

[Leo]

honda was nice and already ran the wires for you.. they go to the kill switch on the bars.. I don't know the wire colors off the top of my head but if you look at the wiring diagram in the back of the manual for the two wires that go to the run-kill-run switch, those are the ones :)

Leo

[Leo]

also take a peek at this thread;

http://www.exriders.com/vbb/showthread.php?s=&threadid=32546

Leo

[dads400ex]

OK, thanks alot guys for the info now I can hook it up without tracing the wires and wondering what I might short out;)

Thanks again,
dads400ex