hydraulic clutch lever

[liek]

hi guys i was browsing on eBay the other day and came along this item !! what do you guys think about it ! will it work on the 400ex?http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=170407680782&viewitem=&sspagename=STRK%3AMEWAX%3AIT#ht_3941wt_1167

[sab24711]

pcc is for pitbikes mini atv store. and plus you need to fab up some bracket for the cylinder.

[honda400ex2003]

id rather have a magura than that one, at least you know that you can get parts for those easy enough. steve

[hondaking52]

Originally posted by honda400ex2003
id rather have a magura than that one, at least you know that you can get parts for those easy enough. steve x2! i love my magura!!! sooooo smooth!

are hydraulic clutches easy to put in or are the a b**** like how do the basics differ of putting this in rather then a non hydraulic clutch?

[hondaking52]

unbolt the old one off the case and off the bars, and bolt on the new one, 10-20min tops

[rcatvrider]

The cable looks far too short. The braided line I should say.

Originally posted by hondaking52
unbolt the old one off the case and off the bars, and bolt on the new one, 10-20min tops

Thats it? thanks bro...what about putting it on to the piece that attachs it to the clutch in teh engine is that the same as the stock?

[hondaking52]

ya you just take the 2 8mm bolts out of the engine, uncouple the cable and then put the new one on, use's the same arm and stuff

[honda400ex2003]

exactly what he said, ^^ and magura comes with a new mount for the cylinder to slide into and be put in the right place. IF you have a stock clutch they work great if not i would get cable. i had more problems with mine after i put the tusk in there i ended up getting a cable setup hense the asvs lol. at least it was a good reason to get them. lol. steve

[monster400ex]

i was goin the magura route my clutch cable kept breakin so i bought a cr lever and a motion pro cable broke in a week
so i went to my buddy at the local atv shop and he said to put a stock clutch and cable and i bought a moose ez pull lever i can use my pinky its so easy he also told me that the racers use the stock clutch with the hinson basket and a few other goodies

[omeeomy]

maguras are nice but ya have to be careful
ive seen one tube melt and then one break real easy at the lever
so im still up in the air about them