Removing Durablue Axle?

[TrapZ400]

Can someone give me step by step instructions on how to remove a durablue eliminator axle from a z400?

Thanks

[Jimbo M]

1) Remove wheels.
2) Remove left wheel hub.
3) Loosen and remove axel lock nut that butts up against the sprocket hub. (There is a round clamp that is slid out of a groove in the axel that is underneath the lock nut. This comes off before you can slide the lock nut off).
4) Completely loosen the chain and take it off the sprocket. You can then slide the sprocket hub off.
5) remove rear brake caliper.
6) slide the axel out to the right.