i want to shave my 300ex fenders what is the best way

[04 300ex rider]

i have a 04 300ex yellow duglas wheels jet kit maxxis razers dg full exaust 6 pack rack i want to shave the fenders what is the best way to and what are some cheap 300ex upgrades

[QuadCobbler]

400ex arms are prety easy to come by and 400 shocks, all you would need is a shock relocator.

[Tommy Warren]

just mark out where you wanna cut with a black marker and use a hack saw or dremmel tool and clean it up with sand paper


you might want to get a K&N filter if you don't have one, play with different sprockets, other than that you'll be into bore/stroke kits and head work.... may want to try an 01 raptor 660 rear shock it bolts right up. just PM me if you want help finding one.

[QuadCobbler]

I used a utility knife to cut my fenders, a 4 1/2" grinder with sanding wheel to cleanup the edges and straighten the uneven parts, and a body filler tool for removing bondo, that looks like a chesse grader to round over the edges so the edge looks more of a factory finish. I used 1/8" painters tape to mark out where I wanted to cut. If you dont like how it looks you can lift up the tape and move it in or out. I would lay paper down over the section of the fender you are about to cut off before you cut it so you can see how it would look after it is cut.

If you use a knife be carful not to cut your self, there are thin spots in the fenders and the knife will pull easeyer and may slip out and cut your hand, or leg.

[IRISH-RACER-14]

Originally posted by QuadCobbler
400ex arms are prety easy to come by and 400 shocks, all you would need is a shock relocator.
that sure is the best way to cut stock plastics

[Tommy Warren]

Originally posted by 04 300ex rider
i have a 04 300ex yellow duglas wheels jet kit maxxis razers dg full exaust 6 pack rack i want to shave the fenders what is the best way to and what are some cheap 300ex upgrades

read the first post again IRISH.:rolleyes:

[IRISH-RACER-14]

im talking about the pic.

[300ridr]

Originally posted by QuadCobbler
400ex arms are prety easy to come by and 400 shocks, all you would need is a shock relocator.

does your light shine good with that bumper

[QuadCobbler]

Originally posted by 300ridr
does your light shine good with that bumper


Not as good as my old DG bumper. when I first put it on the light didn't work so well it mostly reflected back towards me. It works better now though, I drilled out all of the holes to about 3/4" they were like 1/2"