novak8
11-23-2009, 04:23 PM
i know there are some threads on this already but none have really helped my situation.
after rebuilding the top end, i was trying to set the timing but nothing would line up exactly (lines on cam gear). i figured it was no big deal so i finished putting it back together. it fired right up and idled ok but was smoking ALOT. tryed driving it around the yard thinking there was just some oil in the head but i couldnt go beyond like half throttle otherwise it would cut out and stall. i found that if the choke is on the whole time it will run better but still smoke a ton. i know it is not the rings since they were just replaced. any help will be greatly appreciated since i have torn the motor apart 3 times trying to get the timing right. if it could be anything else please let me know.
after rebuilding the top end, i was trying to set the timing but nothing would line up exactly (lines on cam gear). i figured it was no big deal so i finished putting it back together. it fired right up and idled ok but was smoking ALOT. tryed driving it around the yard thinking there was just some oil in the head but i couldnt go beyond like half throttle otherwise it would cut out and stall. i found that if the choke is on the whole time it will run better but still smoke a ton. i know it is not the rings since they were just replaced. any help will be greatly appreciated since i have torn the motor apart 3 times trying to get the timing right. if it could be anything else please let me know.