Haulinbass
11-23-2009, 12:12 AM
i know its not a good handling chassis and i would be better off doing this with something better.Lets get that over with the frame is practicly free
What would it take to get a 2 stroke in the frame, I know most 2 strokes are not counter ballanced and the frame will need to be beefed up or even filled but what else am I looking at.
both myself and friends are very good with both MIG and TIG welding.
What I would really like is either a 250 or 300 that will go in fairly easy, the 250r is an obvious choice but not the easist to find a complete motor.
thanks for any and all help
What would it take to get a 2 stroke in the frame, I know most 2 strokes are not counter ballanced and the frame will need to be beefed up or even filled but what else am I looking at.
both myself and friends are very good with both MIG and TIG welding.
What I would really like is either a 250 or 300 that will go in fairly easy, the 250r is an obvious choice but not the easist to find a complete motor.
thanks for any and all help