Adjusting the chain on a 03 ltz 400

[jordanf1986]

can you guys help im not sure how to adjust my chain its way too loose

[wykyd450R]

Loosen the 4 large bolts ontop of the swingarm to allow the carrier to maove. Then adjust the 2 bolts on the rear of the swingarm/carrier evenly. Tightening the 2 nuts pulls the carrier back, to tighten the chain.Once the desired tightness is reach, tighten up the 4 large bolts real tight to prevent the carrier from sliding. I have always tightened mine super tight, so the carrier wouldnt slide and bust the 2 bolts in the rear off.

[John Noftsinger]

Make sure you clean grease from chain between slide blockcarrier and swingarm spray wd-40 to get out ,mine loosened all the time till i figured it out the block slids forward easy when grease gets in there.just a tip!