Ball joints fit my Lonestars???

[BuDDy L]

http://triple777racing.com/yahoo_site_admin/assets/images/c6d5_1.257205900_std.JPG
http://triple777racing.com/yahoo_site_admin/assets/images/dd34_1.257205801_std.JPG


16mm x 12mm Honda / Suzuki Ball Joint



Honda- 450R, 250R, 400EX, 300EX, 250X

Suzuki- LT Z400 (2003, 2004)

Suzuki- LT250R(tops)

Kawasaki- KFX400

Arctic Cat- DVX400

Fits most Strong Arm, Symmetry, Burgard, Lone Star Racing, Eyeball, Fullflight, etc...

Remove your ball joint from the a-arm and spindle, measure the 2 diameters, refer to the photo.

NO REFUNDS, NO RETURNS on ball joints.



Specs.

Length Center of stud to end of Rod Threads 3.65 inches Rod Thread M16-1.5R Stud tapered from .498 to .559 diameter with M12-1.25 thread Stud end length is about 2.75 inches long




that is what is on the sellers site, i have aftermarket lonestar a arms, are these compatible or will i have to shave them down, thanks guys

[Langbolt]

Those look like ES3045RL tie rod ends. Used on the 1991 GMC Tracker (or Suzuki swift)

Take your A-arm to Auto zone or Pep boys and ask for one of those tie-rod ends and see if it fits!

Those worked for me on a set of A-arms I built for my 600EX

:devil:

[BuDDy L]

the reason i ask for these is they are 82 dollars with shipping compared to 130 with shipping from lonestar direct, i dont want to spend the extra 50 bucks lol

[Rich250RRacer]

Originally posted by Langbolt
Those look like ES3045RL tie rod ends. Used on the 1991 GMC Tracker (or Suzuki swift)

Take your A-arm to Auto zone or Pep boys and ask for one of those tie-rod ends and see if it fits!

Those worked for me on a set of A-arms I built for my 600EX

:devil:

I use the ES3045RL tie rods in both of my Lonestar quads, much cheaper than buying them from LSR. I work at an auto parts store so I get them even cheaper. I pay about $8 each for the off brand, but can get Moog for about $18. The cheap ones work just fine.

[BuDDy L]

Originally posted by Rich250RRacer
I use the ES3045RL tie rods in both of my Lonestar quads, much cheaper than buying them from LSR. I work at an auto parts store so I get them even cheaper. I pay about $8 each for the off brand, but can get Moog for about $18. The cheap ones work just fine.



thats great! so rich. i have an auto parts store ma and pop right down the street, what do i ask for from them, i need upper and lower ball joints, ill call them before i go what should i say to them to see if they have them since the off brand works

[Rich250RRacer]

Originally posted by BuDDy L
thats great! so rich. i have an auto parts store ma and pop right down the street, what do i ask for from them, i need upper and lower ball joints, ill call them before i go what should i say to them to see if they have them since the off brand works


Give them the Moog part number ES3045RL. They're tie rods for an 89-98 Geo Tracker, but I don't remember if they're inner or outer.

[Langbolt]

They're OUTER

So....BuDDyL.....call your Mom & Pop Auto Shop and ask for:

Outer Tie-Rod end for a 1991 GMC Tracker.

:devil: