PDA

View Full Version : What is up?


rooster300ex
11-15-2009, 07:30 AM
What could possibly be wrong. My 300ex is hitting what sounds like the rev limiter half way through the max rpm's in 2nd and 3rd. I've always run 18in tires and run 14/36 and it has never done this before. I know for sure the engine is not revving high enough to be the rev limiter. The new tires i'm running are 18-11-10 fast trekkers. U think them being smaller then most 18's could be the problem.
4x4_war
11-15-2009, 10:05 AM
well you know how it hits the rev limiter in reverse? if it sound like that, you may have some wires crossed. check the wiring harness to see if there are any melted or sratched wires that may be grounding out. otherwise the tires would have nothing to do with it hitting the rev limiter. all a smaller tire will do is slow you down and give you more power, rather than speed. a bigger tire has to travel more in order to complete one full revolution, a smaller tire will spin much faster at lower speeds.
rooster300ex
11-16-2009, 08:29 AM
i'll check em out. anybody wanna buy some 18-11-10 rear fast trekkers with 3 rides on them??
stuntin andy
11-16-2009, 11:29 AM
it could also be a carb issue maybe like a pilot jet thing?
shaungray89
11-16-2009, 02:00 PM
mine did it with some water in the bowl make sure you dont have water in the carb
rooster300ex
11-17-2009, 08:11 AM
Originally posted by shaungray89
mine did it with some water in the bowl make sure you dont have water in the carb

I did get the gas out of my lil sisters quad, and when i cleaned her carb it had water in the bowl. i'm gonna drain the gas and clean the carb. man big brain fart. I hate when i let things slip my mind like that.