Take a look at my hand made centermount exhaust.

[Honda 250r 001]

Just got bored and decided to take the airbox off and work on fabbing a center mount exhaust for my 250r. The dyno port pipe i was using needed no fabbing, just he silencer. I just cut the pipe and rotated and made angles and welded. What you guys think?

[Honda 250r 001]

pic

[Honda 250r 001]

more pic

[Honda 250r 001]

even more pic

[born2ride14]

What are you doing for an intake?I dont really see a point of doing that other than for pure looks. Plus its not even in the center

[Honda 250r 001]

Originally posted by born2ride14
What are you doing for an intake?I dont really see a point of doing that other than for pure looks. Plus its not even in the center

shorter stinger keeps less heat in the pipe, making the motor run cooler. This was just a little project i did im actually going to run a esr centermount pipe. But this pipe would work fine with the esr airbox eliminator kit.

[1promodfan]

Looks good man, there's nothing wrong with experimenting a little.:D

[Honda 250r 001]

Originally posted by 1promodfan
Looks good man, there's nothing wrong with experimenting a little.:D

haha thanks, i sure cant wait to see the look on my pals face when he sees no silencer on there, or atleast he thinks haha. sure wont find another one of these around!

[250rPRIDE]

better put a turn down on it..:D

[Honda 250r 001]

Originally posted by 250rPRIDE
better put a turn down on it..:D

ya, i was wondering how well it would work shooting strait at the tail light. But im going to be running a cr 250 ignition soon anyway so i wont needs lights. I fired it up for a to see what it sounds like and ITS LOUD, really loud.

[cdrookie]

Originally posted by Honda 250r 001
But this pipe would work fine with the esr airbox eliminator kit. [/B]

you sure? if memory serves me right the filter will sit right beside the silencer...

[Honda 250r 001]

Originally posted by cdrookie
you sure? if memory serves me right the filter will sit right beside the silencer...

this is what it should look like when finished. only difference between mine and this one is mine will have a smaller diameter filter.

[Honda 250r 001]

Any other oppinions on this? Did i ruin this pipe or is it sorta cool?

[trx310R#24]

Originally posted by Honda 250r 001
Any other oppinions on this? Did i ruin this pipe or is it sorta cool?

i think its awesome. you didnt ruin it.

[Mrs. SFRacing]

damn man thats hotttt

[thedeatons]

Okay, here is what ya do to help (in my opinion). Clean up the welds, make sure they are good and deep. The grind them down almost smooth with the pipe. Then either have it sandblasted and thermal coated or chromed or simply use a good heat paint. This way it looks more finished, as opposed to cobbled together :)

Just my opinion on how to get a clean look...

James

[Honda 250r 001]

Originally posted by thedeatons
Okay, here is what ya do to help (in my opinion). Clean up the welds, make sure they are good and deep. The grind them down almost smooth with the pipe. Then either have it sandblasted and thermal coated or chromed or simply use a good heat paint. This way it looks more finished, as opposed to cobbled together :)

Just my opinion on how to get a clean look...

James

One things for sure, the welds DONT look good haha. My dads been welding for 25 years and he welded the pipe for me, the round part and it doesnt look the best. This metal is really, really hard to weld. Im thinking of cleaning them up on the wire wheel and see if they look any better.