Mx tire pressure

[Lquad71]

Not sure but i have pep suspension and i think its is supposed to be 1.5" above ground when bottemed. but without the correct tires pressure that is useless.
I think it is 10 pounds in the fornt
and 8 in the rear, is that right?

[cwr~413]

it kinda depends on track conditions a little . i run about 4 in the rear on my dunlop quadmaxs most of the time, 8-10 on the front.

[motox_rider695]

8 sounds like a lot in the rear, i run anywhere's from 3.5 - 6 and anywhere from 8-10 in the front...

I bent my wheels running low tire pressures so now I pump them up. I dont get as good traction but it slides easier which helps in the turns. I run like 5PSI in the rear and 7PSI in the front.

[BlaineKaiser450]

Originally posted by FlewByU352
I bent my wheels running low tire pressures so now I pump them up. I dont get as good traction but it slides easier which helps in the turns. I run like 5PSI in the rear and 7PSI in the front. same here

[motofreak2772]

I heard wayne from baldwin says to run 8 in the rear and 12 in the front(always) and adjust for track conditions with your suspension. I would say 6-8 in the rear and 10-12 in the front is good.