woodsracer144
11-05-2009, 05:13 PM
ok so i just got this modle 70 winchester 30-06 sprinfeild black synth... it was a banquet gun and was never fired... i paid 485.?? otd with a bushnell scoope and rings and a bore site... need less to say i got a really good deal i think...
any ways i start to sight it in the little time i had and at about 25 yards i was about 3 inches to the right and 3 inches low then i got it to be about a inch low and a little to the left not much
i pushed it to about 50 yrds and i was about 4 inches low and it went one on the right about 4 inches over and 3 low then it was about 2 to the left and then it went right back over by the fist round about 4 to the right...( i fired 3 rounds and it went right left right)
i was laying down flat on the ground shooting down a hill with no bumps so the bullet was stopped at the bottom of the hill... it was about a 60 yrd hill... i had the rifle on a sand bag to hold it up and to make every shot as close to the same as i did the one before..
in 3 rounds i couldnt get it to raise up at all when it was about 50 yrds away... on the adjustments it says one click = 1/4 inch at 100yds i had to turn it about 8 clicks (2inches) to get it to to the left at my first 3 rounds at about 20 yrds...
they way i see if if your moving a 1/4inch at 100 yds you should be at a half inch per click at 50 yrds and 3/4 in inch per click at 25 yds
its my first rifle... i've never used a scoop on a HP rifle i used a rem. .35 for about 4 years now and im tird of askin my uncle to use it so i got this... that .35 was a really nice gun i really liked it i just didnt like having to ask and not own it...
i've fired 8 rounds tonight and 2 out of the 8 im not sure where they went... in on the holes looked like it hit is again alittle out side of it but not much and then im not sure about the other one...
i just dont under stand why i wont rise up... i dont wanna say im a cheap mother ****er but these shells were $$ and i dont want to shoot 2 boxes of them to get it right... i would like to at most have to use a box... i've fird 60 rounds so far...
Hornady 30-06 sprng 165 gr SST inter lock
then its got a chard for the drop and all that and its
Muzzle 100yds 200yds 300yds 400yds
2800FPS +1.8" 0.0" -22.8" 46.2"
another thing i noticed with these shells is on the bullet its self there is the little knochest that run vertical with it and normally the set the bullet in the case so you dont see them...
these are raised up a little so you can see it on them all..
alot of the people by me do this when they reload them so its closer to the rifleing
Thanks for any and all your help...
any ways i start to sight it in the little time i had and at about 25 yards i was about 3 inches to the right and 3 inches low then i got it to be about a inch low and a little to the left not much
i pushed it to about 50 yrds and i was about 4 inches low and it went one on the right about 4 inches over and 3 low then it was about 2 to the left and then it went right back over by the fist round about 4 to the right...( i fired 3 rounds and it went right left right)
i was laying down flat on the ground shooting down a hill with no bumps so the bullet was stopped at the bottom of the hill... it was about a 60 yrd hill... i had the rifle on a sand bag to hold it up and to make every shot as close to the same as i did the one before..
in 3 rounds i couldnt get it to raise up at all when it was about 50 yrds away... on the adjustments it says one click = 1/4 inch at 100yds i had to turn it about 8 clicks (2inches) to get it to to the left at my first 3 rounds at about 20 yrds...
they way i see if if your moving a 1/4inch at 100 yds you should be at a half inch per click at 50 yrds and 3/4 in inch per click at 25 yds
its my first rifle... i've never used a scoop on a HP rifle i used a rem. .35 for about 4 years now and im tird of askin my uncle to use it so i got this... that .35 was a really nice gun i really liked it i just didnt like having to ask and not own it...
i've fired 8 rounds tonight and 2 out of the 8 im not sure where they went... in on the holes looked like it hit is again alittle out side of it but not much and then im not sure about the other one...
i just dont under stand why i wont rise up... i dont wanna say im a cheap mother ****er but these shells were $$ and i dont want to shoot 2 boxes of them to get it right... i would like to at most have to use a box... i've fird 60 rounds so far...
Hornady 30-06 sprng 165 gr SST inter lock
then its got a chard for the drop and all that and its
Muzzle 100yds 200yds 300yds 400yds
2800FPS +1.8" 0.0" -22.8" 46.2"
another thing i noticed with these shells is on the bullet its self there is the little knochest that run vertical with it and normally the set the bullet in the case so you dont see them...
these are raised up a little so you can see it on them all..
alot of the people by me do this when they reload them so its closer to the rifleing
Thanks for any and all your help...