cam or header

[400exfirebrethr]

Well I am wondering if it would be better to get a header like fmf powerbomb or should i get a cam and worry about the header later.

Which one would make more power and torque?

[Duf6]

i don't know as much as others on here but i felt the most from my cam

[400exfirebrethr]

what cam would you reccomend

[Duf6]

mines a hotcam stage 2 but itdepends where you want the power

[400exfirebrethr]

i want bottem to mid

[Duf6]

then stage 1

[400exfirebrethr]

ok thanks duf

[gt400ex]

Do a stage 1 or 2 cam and you can grind the welds down in the stock head pipe to flow better.

[400exfirebrethr]

i already have

[odog]

i would say cam. most people say that the stock header is real good until u start getting into the bigbore kits for an example a slip on pipe and a full exhaust isnt that much difference in horsepower until u get a bigbore kit. also i think a bigger header will help out on the top end power not the bottom end torque.

[tater281]

You will benefit the most out of a cam by opening up the intake and exhaust. If you plan on doing both, I would say header first, then cam. Just my .02

[rob_990]

youll get more gains from a cam

[TRXRacer1]

Originally posted by rob_990
youll get more gains from a cam

X2 :bandit:

[400exfirebrethr]

ok thanks yall
i will probably go with a hotcams stage one
do i need h-d valve springs to run it

[rob_990]

their not required

[odog]

Originally posted by 400exfirebrethr
ok thanks yall
i will probably go with a hotcams stage one
do i need h-d valve springs to run it no hd springs needed but a stage 2 cam will probley be better in the long run and it will give u bottom and mid. power to help u pull through the higher gears faster

[400exfirebrethr]

aight thanks for everyones help
i will probably be getting the hotcams stage 2 in a few weeks
CANT WAIT!!!!