Did I ruin my clutch cover? pics

[destey]

Used a press to get the seal out, looks like some of the cover came off with it.

http://img27.imageshack.us/img27/6307/dscf2237d.th.jpg (http://img27.imageshack.us/i/dscf2237d.jpg/)

http://img36.imageshack.us/img36/268/dscf2239n.th.jpg (http://img36.imageshack.us/i/dscf2239n.jpg/)

If i clean it all up, will it function ok? tia

[Honda 250r 001]

i think it'll be fine, just clean it up a little with sand paper and when you go to put the seal back in use some silicone around the ring of the gasket to help it seal better

[machwon]

Destey, the seal and spring part is not supposed to separate from the steel still in the cover. I've never tried putting one back in to re-use it.

[deathman53]

the new mech. seals I got from honda, everything was one peice. I had to hit out the metal collar and such and I was left with what you have. I know the parts fiche shows it 3 separate parts, it came as one piece in the honda bag. Don't forget the seal behind the mech. seal and maybe a new bearing also.

[destey]

thx for the replies. going to try and clean it up and seal with silicon