dual battery dual slolenoid???

[jrsmith1491]

hey i was thinking about converting my 07 450er to the dual battery dual solenoid thing i would like some opinions and if some1 would like to tell me the best way to do it id greatly appreciate it the stock setup just isnt enough for dead egine gncc starts plus my bike doesnt wanna start with any throttle??

[duke416ex]

You don't need 2 silenoids, just one with 2 batteries. There is a long thread on here about it, do a search. There are drawings and diagrams there to help you see how to wire it.

[Scro]

You won't use two solenoids. The batteries are wired in series. The only thing that is running off the positive post of the second battery (24v) is the starter. Everything else should be run off the positive post of the first battery (12v). The solenoid will be between the second battery and the starter. Good Luck.

Also, I've had better luck with no gas on startup. But if choose, you can bypass the throttle switch by splicing the two wires going up to the throttle together.