PDA

View Full Version : 2008 Raptor 250, FLAWLESS condition + Aftermarket



flyboy1294
10-11-2009, 06:01 PM
Hey guys,
we have a 2008 Raptor 250 that we would like to sell.

First off let me say that we bought the bike when it was 6 months old. It looked like new and had been let sit inside a guys garage for almost the entire time. We are the second owners. It has always been ran on 93 octane. The chain was oiled before and after every single ride. The air-filter was washed and oiled once a month, or as needed. We used 15w40 full synthetic oil in it, and would change it about every 6 months. (The bike was only ridden 2-4 times a month). It was always trail ridden and babied like crazy. It was never taken through any mud of any kind, never driven on the road, never raced. Since we've had it, it has been kept in a heated garage and never allowed to spend the night outside. It runs absolutely immaculately, and there is almost no cosmetic blemishes at all, only a few scuffs from boots moving over the fenders that aren't even noticeable. It is VERY clean.
Case in point; this bike is beautiful. It looks and runs perfectly, you will not find a prettier used Raptor out there.

The aftermarket includes:

X-Factor nerf bars: $101.97
http://www.x-factormotorsports.com/ez-catalog/X381942/2/52-835
PRM Chassis Skid plate: $119.95
http://prm-atv.com/MN.asp?pg=products&specific=1687&from=118
UM Swingarm Skidplate: $75.95
http://www.magicracing.com/UM-Racing-Swingarm-Skid-Plate--Raptor-250_p_5222.html

We're asking $2,600 OBO. We are interested in trades. 400exs, z/kfx/dvx400s, and 450s are all up for consideration. Let us know what you have, and we'll let you know if we're interested.

If you have an offer or trade, do not hesitate to PM me. Also contact me with ANY questions or concerns, or need for additional pictures. I should be able to get back with you in a matter of hours.

Thanks for looking!
http://i82.photobucket.com/albums/j245/jerry42633/Powersports/101_0330.jpg
http://i82.photobucket.com/albums/j245/jerry42633/Powersports/101_0331.jpg
http://i82.photobucket.com/albums/j245/jerry42633/Powersports/101_0333.jpg
http://i82.photobucket.com/albums/j245/jerry42633/Powersports/101_0335.jpg
http://i82.photobucket.com/albums/j245/jerry42633/Powersports/101_0336.jpg
http://i82.photobucket.com/albums/j245/jerry42633/Powersports/101_0338.jpg
http://i82.photobucket.com/albums/j245/jerry42633/Powersports/101_0339.jpg

bubsyfz450
10-16-2009, 01:48 PM
just curious, i thought you said the chain was oiled before and after? why is it rusted?
and another, is you said it was never in mud, why does the header have mud dried on it?

just curious, it looks nice tho

flyboy1294
10-16-2009, 02:15 PM
Originally posted by bubsyfz450
just curious, i thought you said the chain was oiled before and after? why is it rusted?
and another, is you said it was never in mud, why does the header have mud dried on it?

just curious, it looks nice tho

I know the chain was in fact oiled before and after every ride. I was the one that oiled it. I just went and looked at it, I don't see any rust? Maybe you see something I don't, I don't know. But if it is rusted, it's from sitting in the garage without being ridden.

The atv was never in mud. The header is rusty from where the paint burned off, I think. I'm not sure, but most of the matt finish pipes I've seen are like that. But that is not baked on mud.

I've got a lot of time into this ad, and into this quad. I know the history and I know the rider. Don't ask questions just to be an ***. For the love of god.