XC DVX400 Aftermarket partout

[airmobile101]

My bike is going back to stock. Need the money to upgrade my new ride. I will start on Monday with the tear down. Won't be able to ship out until the 19TH of Oct. This is what I got:


Standard Roll design stem w/ 1/18 anti vibe clamps --------- SOLD
IMS dry break tank(not installed) New 90 degree vent not installed. ($90.00 shipped)
Arens. Bros +1 a-arms (165.00 shipped)
TCS ZPS triple rate shocks --- SOLD
Houser 1.25 swinger with Houser Link--------SOLD
LSR extendable axle ($85 shipped)
Custom axis rear dual rated shock ------ SOLD
Trail tech -16 oz. flywheel---SOLD
GPR V2 Stabilizer ------------- SOLD
Hot cams stage 1-------- SOLD
Keihin FCR 39MM carb, includes yfz450 cable and throttle($90.00 shipped)-SOLD

Brand new JE piston (92mm) stock ($45.00 shipped)
FMF Hi-flo header with FMF tit. exhaust(has seen better days).-- SOLD

Aramadillo skid with the pocket removed from me! ---- SOLD
PRM rear grab bar(control series). (60.00 shipped)
New set of Bingstar heel guards, never used. They have the blank mounting plate so you have to drill the holes to mount them. ----- SOLD

I also have plenty of stock parts also. Shoot me a PM or email if you want a pic. I didn't list any prices. I know the ecomony suxs, but please no lowballs!
airmobile101@toast.net

[jefteland]

how much for carb shipped to 56701
stem is it stock lenghth
how much for Trail tech -16 oz. flywheel
GPR V2 Stabilizer

[Moparkido]

What do you want for the stem, carb, full pipe

[airmobile101]

Carb= $150.00 , that includes the YFZ450 throttle cable
Entire exhaust= $100.00 Now, the exhaust canister does have a dent from my brake caliper. I usually just heat it up with propane and push it out.
trail tech -16 = $100.00

Stem is stock length, $125 , minor chrome chipping at base where tie rod ends bolt up. That includes the 1 1/8 anti-vibe clamps. Ill sell the entire setup with the GPR for $300.00. Just one issue, the bracket that came with the GPR was for a +1 stem, so I had to trim the bracket. But it has no effect on it what so ever. I ran that GPR in two races with no issues.

Now, this doesn't include shipping,but it shouldn't be too much more. I charge for the actual shipping charge what UPS and USPS charges.

I'm at work now, I will get pics up starting on Monday.

[airmobile101]

FYI, I can make it cheaper for yea. Kinda like a package deal if you buy more than one thing from me;)

[Moparkido]

Do you have any stock tie rods? I might take that carb off your hands.

[airmobile101]

Originally posted by Moparkido
Do you have any stock tie rods? I might take that carb off your hands.
Yes I do. How about tie rods and carb for 165.00 shipped????

[Moparkido]

If you can wait intell next friday then ill take it. Im out of money.

[airmobile101]

Originally posted by Moparkido
If you can wait intell next friday then ill take it. Im out of money.
I can do that. The carb is still on the bike! lol Or, if you don't want the carb, Ill send the tie rods for 25.00 shipped.

[Moparkido]

I want the carb to. Can you send me pics of the carb and full pipe to matearp91@yahoo.com. Thank you

[airmobile101]

Originally posted by Moparkido
I want the carb to. Can you send me pics of the carb and full pipe to matearp91@yahoo.com. Thank you
Yea, give me until Monday and I'll have a pic out to yea.

[Moparkido]

Ok cool thank you

[jefteland]

pm you

[airmobile101]

pm you back;)

[airmobile101]

LIST UPDATED @ 10/11 1620 CST

[airmobile101]

TTT :D

[airmobile101]

Im slowly yanking this stuff off. Sorry for the delay.

[airmobile101]

$40.00 plus shipping

[airmobile101]

DWT front 10" beadlock rings for shamrocks, $55.00 Shipped

[airmobile101]

FMF full exhaust with FMF hi-flo header. The can has seen better days, I repacked it a month ago and it already needs to be repacked, but its not a issue if your a trail rider. $100.00 plus shipping

[airmobile101]

PRM control series rear grab bar. The right side is a tad bit bent. I actually think they sent it to me that way!!!! $50.00 plus shipping.

[airmobile101]

IMS dry break tank.I bought this off EBAY about a month ago, never used it,but I order the vent. Some dumba## put a bolt in place of the vent. I paided $100.00. I would like $100.00 in return. So, $110.00 shipped????? FYI, I will test the tank before shipping to make sure it holds fuel and no leaks.

[airmobile101]

I have a LSR adjustable axle that I bought from ONE_BAD_400. It has a warp in it on the sprocket side. Warp in not even the word to use. It is barely noticeable. You have to really eye it to even catch it!!! I raced that axle for a full season with zero issues with it!
$80.00 plus shipping

[airmobile101]

ARENS Bros. +1 a-arms. These are for a 03 model z400. I was too lazy to swap spindles, so I just swapped the ball joints on the lower a-arms. Ball joints all good,but I think a grease/dust boot is torn. Im gonna include HD tie rods which are way more sturdy than stock. $200.00 shipped.

[airmobile101]

Ok, I can't use the GPR dampener since they dont make the bracket anymore for a 450r. So heres the deal. I would like to sell the stem, and dampener as a set. Its a Roll Design standard lenght stem. It has the chromoly chipping at the base where it mounts to the tie rod ends, other than that, it perfect. Im also including the 1 1/8 bar clamps. The GPR has only 2 races on it. I purchased it new, but I had to modify the GPR bracket, they sent me a +1 bracket for a +1 stem. No issues at all. $275.00 plus shipping.

[airmobile101]

Ok, this item is spoken for at the moment. Trail tech -16oz. flywheel

[airmobile101]

I got a few other things that need to move. FCR 39MM CARB from a 05 YFZ450, Twin Air velocity intake, etc................. If you don't like my price, then shoot me an offer! Boys and girls, I gotta move this stuff!

[Moparkido]

Can you take a pic of the dent in the pipe and send it to me. I bent my axle the otherday so im not going to be able to get the carb. Is the axle your selling bent at all? What is the leangth of it?

[airmobile101]

The axle is bent. But it is barely noticeable. I actually took it to a Suzuki dealer and they put it up on dies and spun it. They asked me if I was kidding about it being warped. They said it was in tolerances. YOU CANT NOTICE IT !

[airmobile101]

The exhaust could use a new hanger, but give me a few and I'll take a pic.

[airmobile101]

Most of the dent is hidden by the exhaust bracket.

[Moparkido]

How wide is the axle? How much for the full pipe,axle,tie rods?

[airmobile101]

The axle is adjustable. It can go from stock length to +2. I would have to ship it in 2 packages. 1 for the axle and then another package for the tie rods and exhaust. I can probably do it for $205 shipped.

[Moparkido]

Alright can you hold them intell friday? I can you the stock Bearing Carrier with the axle right

[airmobile101]

Exhaust is pending sale at the moment. Axle is still avalible.

[airmobile101]

Updated @ 10/14 @ 1645cst

[airmobile101]

Updated @ 1650cst on 10/14.

[Moparkido]

What would it be for axle and tie rods shipped?

[airmobile101]

$95.00 plus shipping

[airmobile101]

Updated @ 10:00 am cst 10/15:D

[airmobile101]

UPDATED @ 12:15 PMCST @ 10/15

[airmobile101]

UPDATED @ 0800cst on 10/16

[Moparkido]

Make me a deal on the carb, axle, tie rods shipped. I got paid today so I have money now lol

[airmobile101]

Originally posted by Moparkido
Make me a deal on the carb, axle, tie rods shipped. I got paid today so I have money now lol
Crap,its still gonna be two packages to ship. The axle will have to be shipped UPS, so thats gonna cost at least 15-20 dollars to ship. The carb and stuff isnt a issue. I can do it for probably $250.00 shipped.

[infrontofu]

pm me a shipped price on the blingstar heel guards shipped to 37879 tn and include payment info

[airmobile101]

Originally posted by infrontofu
pm me a shipped price on the blingstar heel guards shipped to 37879 tn and include payment info

They been sold already.

[airmobile101]

Gotta move this stuff. I need a Percision stabby!:D
All prices updated. 10/18 2130cst

[airmobile101]

offers????????????????

[hondaracer_112]

do you have any engine cases?

[airmobile101]

Sorry, not anymore.