2005 Help

[exrider12]

Just got an 05 today, Kick start already installed.

Any way. It came with two exhausts. An NMotion and a Yoshimura TRC series pipe. Its not jetted yet. What one should I put on?

And help me with the jetting. Im used to hondas. It will have one of those exhausts and no lid and uni filter.

[ae13291]

the yfz's are pretty sensitive to jetting it has to be just right or else the BOG will be there. as for the exhaust i would be willing to buy one from you if you want to sell it? is it full or just a slip on?

[yfzrider690]

I would put the nmotion on and start with a 45 or 48 pilot, 170 main and 3rd or 4th clip down from the top on the needle and 1 1/2 turns on the a/f screw. That should put you pretty close.

[exrider12]

I'll sell the Yosh. Its a full system. May even be titanium.. its pretty light.

And thanks. I will get on jetting it. Should I use the Gytr Jet kit?

And the carb already has a Boyesen Quick shot 2 in it.

[yfzrider690]

I wouldn't buy a jet kit, they are a waste in my opinion. Get the ncvq needle, it's out of the yz dirtbike, it's about 15 bucks and just buy the jets seperate. There only about 4 bucks a piece.

[exrider12]

Ok thanks. I will try it out.