View Full Version : 2005 Help
exrider12
10-03-2009, 09:30 PM
Just got an 05 today, Kick start already installed.
Any way. It came with two exhausts. An NMotion and a Yoshimura TRC series pipe. Its not jetted yet. What one should I put on?
And help me with the jetting. Im used to hondas. It will have one of those exhausts and no lid and uni filter.
ae13291
10-04-2009, 11:21 PM
the yfz's are pretty sensitive to jetting it has to be just right or else the BOG will be there. as for the exhaust i would be willing to buy one from you if you want to sell it? is it full or just a slip on?
yfzrider690
10-05-2009, 12:18 PM
I would put the nmotion on and start with a 45 or 48 pilot, 170 main and 3rd or 4th clip down from the top on the needle and 1 1/2 turns on the a/f screw. That should put you pretty close.
exrider12
10-05-2009, 05:54 PM
I'll sell the Yosh. Its a full system. May even be titanium.. its pretty light.
And thanks. I will get on jetting it. Should I use the Gytr Jet kit?
And the carb already has a Boyesen Quick shot 2 in it.
yfzrider690
10-06-2009, 07:34 AM
I wouldn't buy a jet kit, they are a waste in my opinion. Get the ncvq needle, it's out of the yz dirtbike, it's about 15 bucks and just buy the jets seperate. There only about 4 bucks a piece.
exrider12
10-06-2009, 03:20 PM
Ok thanks. I will try it out.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.