PDA

View Full Version : 250x Problems



glatf70gg
09-28-2009, 09:42 PM
I just recently broke 3rd gear while doing hill climbs at trevorton. So I was wondering if anyone has a 300 bottom end i can buy? Or the parts to fix the trans i have.

Now the second problem is with reverse. I cant use reverse. When i engage reverse the motor shuts off as if I hit the Kill switch. I have tried to keep it revved while engaging reverse and still it just shuts of the engine. I can't seem to figure out what the problem is. Thanx ahead of time for all of you guys help and responses.

roadthrills
10-16-2009, 09:57 AM
Try grounding the grey wire that goes from the cdi to the reverse switch located under your clutches in the case. If the reverse works fine then your switch has gone bad. As for the gear, you'll have to split the case and fix the problem.

dman66
10-18-2009, 08:11 AM
I just aquired a transmission for my 250x. I don't know if the trans. is the same as a 300EX. I only needed the 17 tooth gear.

glatf70gg
10-18-2009, 08:24 AM
thanx for the responces guys. i just bought a 300ex trans to put in. and i hope the wiring trick works