Looking for a jetting baseline for 35PWK

[Hutchracer]

I am trying to finish my sons Blaster and am looking for help for a jetting baseline. What we have is a +3 Vito's crank with a .010 bored cylinder, a FMF exhaust and a Project Blaster air box. I plan on running a 35mm PWK carb and am trying to find a V force2 or 3 reed cage. I will run a stock cage with carbon reeds if I can't find a good used one. So if anyone can help that with a starting point that would be great for when I order the carb.

[headache]

probably around a 50 pilot and 155 main to start. Don't get the vforce 2's they suck for bottom end power. Run either pro series boyesens in the stock cage or vforce 3's.