Need Discontinued bolt

[matt14c]

I need the bottom motor mount bolt for an 86 250r. It is 10x135 and is discontinued by honda. I cannot find anything anywhere near that size at any hardware stores. Any help is appreciated! Thanks.

[thedeatons]

The guy with the nice (more expensive) stainless bolt kit on Ebay has them. Or you could go with:

Fastenal

McMaster.com



James

[matt14c]

Thanks guys! :)

[racerx573]

I might have a bunch of motor mount bolts, I'll check tomorrow.

[racerx573]

I also may have some of the stainless allen key ones.

[norcalduner]

Originally posted by TL250R
Try to order 90101-KZ3-J10.

Its a 10x135 engine bolt off a CR250, the head maybe different... but it should work.

I also need one ..... so thanks for this info :)

[deathman53]

ask the parts guy for the book of honda bolts. They have a book of alot of sizes of bolts and nuts. If you get a bolt 5mm, longer it won't hurt anything, it might just stick out 5mm longer. I needed some bolts for my durablue axle for 83/84 250r, I couldn't find a 12mm 1.25 pitch bolt in a hardware store that would fit, I got a longer bolt from honda, had just enough of the unthreaded are to clear the sprocket hub. I put one in and followed with the nut, marked it and cut the bolt. It was cheap too, the bolt was something like $2. I bet you can do the same for the engine bolts, I'm almost sure the bolt can be slighty smaller, I have something like 20mm of thread sticking out from mine.