Harv
09-12-2009, 12:07 PM
This cam ran about 2-3 hours far as we can tell.te flange broke and the valves came in contact with the piston(Had oem cast iron flange and cam gear slotted with die grinder, bad mojo!!). Ended up putting a new cam in. I bought a billet flange from web (35.00) and put it on this cam myself. Centerlined the old one, pressed new one on that centerline. Turns out the old one turned when the valves hit. The cam is retarded and the valves will hit the piston. Needs to be pressed off and realigned. Need a jig or just a good toolmaker!
Mike Harvey
$200.00
(812)664-7343
Mike Harvey
$200.00
(812)664-7343